Jump to content
SAU Community

Recommended Posts

I'm gonna make this short quick and simple!

Just a few years ago, 13 sec passes were considered quick for a street car....

Are 12 second passes now overtaking that? Is a 13 second pass now not good enough?

Just want to get peoples thoughts on this.

Link to comment
https://www.sau.com.au/forums/topic/83058-are-12s-the-new-13s/
Share on other sites

  • Replies 98
  • Created
  • Last Reply

Top Posters In This Topic

13's are quick for a street car. But we are getting faster stock cars, which raises the bar and makes people want to spend a few extra bucks to get into the next bracket to stand out.

A stock GTST for arguments sake runs a 14.5, which compared to a stock 5 litre VS holden 15-16?

So we have a better setup in the suspension department, a driveline thats tough as nails and an engine that responds to modification like no other.

Cheers

Sumo

Best thread this week!

It's gonna be like this for a while to come but eventually, 11's will be it. Speak to the old old OLD Castlereagh boys about street cars racing and tell them your daily driver runs a 13.9 ET and they're usually amazed. You need to remember that 6-pack EH Holdens running 15's were way cool once upon a time.

Add that to the list of 13 sec factory cars coming out that are relatively common on the street, (Falcodores etc) and the bar gets raised that extra little bit.

As far as Skylines are concerned, look at what 20 something people on this forum alone have done with their mostly stock 33's on radials @ WSID and other tracks. 12's are the norm now.

Adrian

Speaking about Skylines only and specifically WSID which i've been attending on a weekly basis since the day it opened.

When it first opened an R33 GTS-T with a std turbo doing a low 13sec pass was quite amazing. Then only a year or so ago a couple of people cracked a 12.9sec with a std turbo. Now their are people doing high 12's with std turbo's which I never thought i'd see.

With modified Skylines a low 12 or high 11sec pass was astonishing. Now fairly standard GTR's are doing low 12's and modified R32/R33 GTR's are doing low-mid 11's without breaking a sweat !

It seems as though these days if you aren't doing a 10 something in a GTR or an 11 something in a GTS-t you just aren't cutting it.

Hopefully i'm back out at WSID before the end of the year doing mid-12's ... which is my goal at this stage.

I think it depends on the car involved. I think a 12 sec street car is fast, although a 13 second street FWD is very fast as they dont have the ET, but the mph. my old MX6 did a 13.7 et, but a 112mph trap speed. My freinds very close to stock GTiR (fuel pump, wound up boost thats it) did a 12.2 et with a mph of 111 trap speed. he also had a 60 foot of 1.6, where mine was 2.5 seconds.

So yes I think alot more cars are running 12s but I think it depends on the drive of the car, RWD, FWD, AWD!

Rhys

Yeah my goal is to cut a 12.4 at least in the next 6 months....

Then take it from there.

But there are alot of quicker factory cars coming out but like people have said back in 00' and 01' a 13 was quick, now its slow.....

My mate has a WRX wagon that does a 12.3 and that thing feels slow! I dunno what is going on these days!

I think it depends what circle you travel in.

I know a number of guys that are worrying about a cage.

A reasonably modded turbo car, but still street, is 11sec or quicker, & beleive me that's heaps cheaper & easier than an 15 sec. EH - & also much nicer to drive on the street.

Regards

Out of interest, my std turbo'd 33 GTS-t went 12.6 @ 107mph last sunday.

Damm, that's good. That mph is especially impressive for the std turbo as well.

Would you mind posting your splits (i.e 60', 330' etc) so I can do a comparison with mine? :)

I managed a 13.1 @ 103mph last Sunday with Std turbo which I was pretty happy with. I think i've still got a bit more improvement left in that time with the current mods once I improve my launches a bit more. I'm planning to go out again in the next couple of weeks and see if I can crack that illusive 12 on the Std turbo.

Damm, that's good. That mph is especially impressive for the std turbo as well.

Would you mind posting your splits (i.e 60', 330' etc) so I can do a comparison with mine? ;)

I managed a 13.1 @ 103mph last Sunday with Std turbo which I was pretty happy with. I think i've still got a bit more improvement left in that time with the current mods once I improve my launches a bit more. I'm planning to go out again in the next couple of weeks and see if I can crack that illusive 12 on the Std turbo.

What was your 60" times? 60 footers are a key to running a 12 with the standard turbo. I ran a 12.98 with a 2.02 60'. If you can get a sub 2.0, you should be home and hosed.

I also believe that it's all down to the people you hang around with, and how quick their cars are. If you're riding in a 11second GTR all day, then of course a 13 second S13 is going to seem slow. But to the general populous who drive Corollas, Astras etc etc ... the 13 second S13 is still damn quick.

What was your 60" times?  60 footers are a key to running a 12 with the standard turbo.  I ran a 12.98 with a 2.02 60'.  If you can get a sub 2.0, you should be home and hosed.

I was doing consistant 1.9 60" time's on all three 13.1 runs that I did on the day.

What mph did you run?

Also, did you shift into 4th before the finish line? I found that I was always just about on the rev limit just before the line and had to shift up to 4th. Could it be possible that perhaps that extra gear change is costing that additional tenth of a second? In hindsight, I feel as though the car would have enough in it to run in 3rd to the line. I might give that a try when I go back in the next week or so...

In reality, I know that a sub 13 is nothing special to write home about where others are running 11's, 10's etc. Although I still think a 12 with the std turbo is a good achievement (and realistic goal) so I'm gonna keep trying till I get it. Then perhaps I'll upgrade the turbo and go for 11's instead :D

I was doing consistant 1.9 60" time's on all three 13.1 runs that I did on the day.

What mph did you run?

Also, did you shift into 4th before the finish line? I found that I was always just about on the rev limit just before the line and had to shift up to 4th. Could it be possible that perhaps that extra gear change is costing that additional tenth of a second? In hindsight, I feel as though the car would have enough in it to run in 3rd to the line. I might give that a try when I go back in the next week or so...

In reality, I know that a sub 13 is nothing special to write home about where others are running 11's, 10's etc. Although I still think a 12 with the std turbo is a good achievement (and realistic goal) so I'm gonna keep trying till I get it. Then perhaps I'll upgrade the turbo and go for 11's instead :D

+

I ran 107mph, so looks like you could do with a few more mph. I was definately in 4th, 3rd can't go to 170kph.

When I got my car I always wanted to run a 12, not a 13.

My car is what I'd call a street car but I don't consider it quick. Just under 200rwkw with a nice power band and 1350kg I should crack into the high 12's with a decent launch.

I still don't really think that's that quick though... so yes I think 13 isn't cutting it (atleast for me).

Maybe it's fast and the furious influenced ... "I owe you a 10 second car" lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...