Jump to content
SAU Community

Recommended Posts

to my above question

i asked a mate who has had a different sets of rims on hes 32 and reckons that the 18 x 9 +30 will be fine

he suggests a 215 front tyre and 225 rear, i dont mind having tyres stretched a tad and will suit the car nicely

sorry for all this newbie questions not the best with offsets and that

Cheers

u can make it fit, depending on the tyre you run up front and the offset all around.

18x9.5 +35 with 255/35 all round. Would that fit without needing to lip/flare the guards? Also, would that be the most suitable size tyre, or should I be looking at 235/40 or something?

18x9.5 +35 with 255/35 all round. Would that fit without needing to lip/flare the guards? Also, would that be the most suitable size tyre, or should I be looking at 235/40 or something?

235/40 would be a much better option for a daily driver, 255's will scrub on the guards and possibly on the suspension up front. 255's are overkill, especially up front, better of spending more a quality smaller tyre. also not 100% sure about 18x9.5 +35's fitting up front, id be worried about upper control arm clearance, saying that im not too sure how much clearance R33's have.

quick questioin

which would fit better to my sedan

18 x 8 +35 all round

or

18 x 9 +30 all round

car will be fair low as well, so might need liping?

Cheers

depends what tyres u run, if u run relative sizes for each width, for example a 215 on the 8" and a 235 on the 9", the 8" with the 215 will have more clearance both from suspension and guards. 9" will sit a lot more nicer and allow better sized tyres, and still fit as long as u long as u dont run over a 235-245 up front.

to my above question

i asked a mate who has had a different sets of rims on hes 32 and reckons that the 18 x 9 +30 will be fine

he suggests a 215 front tyre and 225 rear, i dont mind having tyres stretched a tad and will suit the car nicely

sorry for all this newbie questions not the best with offsets and that

Cheers

215 and 225 will be fine, but as i said u could get away with a 235 up front, and probably like a 255 up the rear if u really wanted.

  • 2 weeks later...

first id ask why u want to run 255's all round, u could get away with smaller tyres easily while maintaining the same traction. im not 100% sure how much inner clearance there is on a R33, but id suspect u couldnt go much over a +35 at the front, to be safe id probably go +30, even so ur looking at issues with guard clearance. id be going a quality 235 instead, will probably cost similar $$ and provide better steering response and clearance.

first id ask why u want to run 255's all round, u could get away with smaller tyres easily while maintaining the same traction. im not 100% sure how much inner clearance there is on a R33, but id suspect u couldnt go much over a +35 at the front, to be safe id probably go +30, even so ur looking at issues with guard clearance. id be going a quality 235 instead, will probably cost similar $$ and provide better steering response and clearance.

For circuit work, with slicks

For road rally work i am thinking 8F & 9R

  • 2 weeks later...

Hey I'm looking at buying some 20"x8" (yes i know 20s on a skyline is a bit of overkill, i want something that will really fill the guards though)

anyway, just wondering if they will fit

20x8

+42 offset

235/30/20 tyres all round

my cars lowered on adjusties, isn't slammed, sits at a nice level, bit lower than super low king springs

Cheers

and no they aren't bling bling chromies lol, they're dished black wheels

Edited by GTS4onP
Hey I'm looking at buying some 20"x8" (yes i know 20s on a skyline is a bit of overkill, i want something that will really fill the guards though)

anyway, just wondering if they will fit

20x8

+42 offset

235/30/20 tyres all round

my cars lowered on adjusties, isn't slammed, sits at a nice level, bit lower than super low king springs

Cheers

and no they aren't bling bling chromies lol, they're dished black wheels

doubt it, rear they will probably fit no worries, fronts i strongly doubt it, will most likely foul on the UCA's pretty bad.

i want something that will really fill the guards though)

20x8

+42 offset

:P:down::laugh:

Quick question, do you think 17x9 +20's all round with 225/40 tyres would be too much for a R32 GTST 2 door with stock guards at quite a low height (currently 17x7s all round, tyres in guards almost)?

Edited by Ceffy_SA
^^will sit very nice depending on camber, but u will need to roll the guards, no pulling or flaring needed.

Ok thanks that was the answer i was looking for, not my car but a friends, will be having the wheels fitted by Wheelworx this weekend, sill put pics up when its all done.

Any thoughts on R33 GTR rims (17x9) on a 32 GTSt?

I have a set and they fit fine with stretched 215/45/17 rubber. I am planning on using them as track wheels so I can run 235/40/17 RE55's all round and rotate them.

I'm expecting to need to flare the guards a bit but i don't mind that. Might even buy fibreglass front guards that are wider.

I'm a bit concerned about hitting the suspension. Has anyone had this combo before with wider width rubber?

thanks,

Russ

Wheel diameter = 18

Wheel width = 9.5

Wheel offset = +35, but with the 15 mm spacers this has changed. Can somone tell me what they are now? +20?

Tyre size = 235/45/18

Modifications to fit = 15mm bolt on spacers all round to clear the brakes + lipped and rolled guards.

post-43220-1216273660_thumb.jpg

Wheel offset = +35, but with the 15 mm spacers this has changed. Can somone tell me what they are now? +20?

Yeah 20 now. Further out is a smaller number. That's a pretty aggresive offset! Did you need the spacers to clear the suspension?

Any thoughts on R33 GTR rims (17x9) on a 32 GTSt?

I have a set and they fit fine with stretched 215/45/17 rubber. I am planning on using them as track wheels so I can run 235/40/17 RE55's all round and rotate them.

I'm expecting to need to flare the guards a bit but i don't mind that. Might even buy fibreglass front guards that are wider.

I'm a bit concerned about hitting the suspension. Has anyone had this combo before with wider width rubber?

thanks,

Russ

i ran 235/45's all day every day on R33 GTR rims, 17x9 +30 with a 235/45 is pretty much the limit for inner clearance, u wont need a flare to fit it in the guard, but ull need to roll the guard, which is something u need to do to fit any decent size wheel. depends how much camber u are running as well, but imo its perfect size for stock guards.

DSCN0042.jpg

Hi guys, as for me I have

Skyline model = R33

Wheel diameter = 18"

Wheel width = 8" front, 9.5'' rear

Wheel offset = 35

Tyre size = 235/45/18 front, 265/45/18 rear,

as for winter (here in Russia its a bit snowy :D ) I put on rear 245/45/18

post-53258-1216368120_thumb.jpg

post-53258-1216368212_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...