Jump to content
SAU Community

Recommended Posts

anyone have pics or have fitted 18 x 9 +30 with a 235/40 on the front of a 32 gtst?

i got mine on atm, adn its mm's from touching the uca, but i just would like to see how low people have gona with at the front

i am running coilovers so i can adjust, but cant drive car as engine pieces getting powdercoated

Nick

i'm looking at getting some meisters for my r33

looking at

19x8.5 or 9 at the front

19x9.5 or 10 at the back

what kind of offset is required? it wont be slammed i want to roll the lip on the guard

heres how it rides atm wit 18s 265s on the rear and 235s on the front no idea on offset of rims

n822125108_1809247_8221.jpg

okok thanks for that if those offsets are for sitting flush with the guards i mite go a bit lower in offset so its sticks out like 5mm

so something like 19x8.5 +25 and 19x9.5+30 and hopefulli i wont hit the guards when i put the dampers on the hardest setting

okok thanks for that if those offsets are for sitting flush with the guards i mite go a bit lower in offset so its sticks out like 5mm

so something like 19x8.5 +25 and 19x9.5+30 and hopefulli i wont hit the guards when i put the dampers on the hardest setting

the issue is 19's arent great for fitment because u cant gain as much clearance by stretching tyres

from another thread in this section:

fitting a 9.5 +22 with a 225/45 tyre would actually be pretty easy, my main concern is being a 19" wheel, even though it will be the same amount of stretch, the angle will be sharper, like so:

fitment.jpg

the blue is a smaller wheel with a larger profile, and the red is a larger wheel with smaller profile but same size tread. the green is at sitting height, the yellow is on compression, the angle change in the 2 guards is due to dynamic camber, obviously in real life its the wheel/tyres angle that changes, but its easier to just show the guard changing angle.

as u can see the lesser angle of the sidewall on the tyre on the smaller wheel allows the guard to come down further, even though the offset, rims width and tread width are all the same. hence why its really hard to get agressive fitment on higher diametre wheels.

so its hard to really get the fitment right with them. with the specs i gave u, depending on the camber they will probably just stick out of the guard a few mm at the rear.

Hey everyone. First time posting here I believe. PM'd a few guys about things, but that's it.

Anyway, I have a set of TE37's I was planning on putting on my widebody Sileighty (S13.5), but since decided to go another route.

I currently have a '93 R33 GTS-T Type M coming across the Pacific and was wondering how well my wheels would fit.

In the front I have 17x9 +0 and in the rear, 17x9.5 +12.

I have no clue about Skyline offsets and to be honest, did not want to take the time to go through so many pages.

If someone could help me out, that would be super!

Hey everyone. First time posting here I believe. PM'd a few guys about things, but that's it.

Anyway, I have a set of TE37's I was planning on putting on my widebody Sileighty (S13.5), but since decided to go another route.

I currently have a '93 R33 GTS-T Type M coming across the Pacific and was wondering how well my wheels would fit.

In the front I have 17x9 +0 and in the rear, 17x9.5 +12.

I have no clue about Skyline offsets and to be honest, did not want to take the time to go through so many pages.

If someone could help me out, that would be super!

They will stick out the guards by heaps. About +25 to +40 is ok for a 33 GTSt.

Are you from the states?

Hey everyone. First time posting here I believe. PM'd a few guys about things, but that's it.

Anyway, I have a set of TE37's I was planning on putting on my widebody Sileighty (S13.5), but since decided to go another route.

I currently have a '93 R33 GTS-T Type M coming across the Pacific and was wondering how well my wheels would fit.

In the front I have 17x9 +0 and in the rear, 17x9.5 +12.

I have no clue about Skyline offsets and to be honest, did not want to take the time to go through so many pages.

If someone could help me out, that would be super!

u can make them fit, but u will need guard work, silvias usually have more clearance in the rear guards, the fronts are similar how ever.

heres a few pics, R33's have a bit more clearance than the R32's.

17x9.5 +13, 235/45 30-40mm flare (mock up with unfinished guard)

DSCN0153.jpg

17x9 -1, 215/45, 30-40mm flare

DSCN1952.jpg

17x9 +16, 225/45, rolled guards

DSCN9843.jpg

Ive been reading through but just getting mixed answers

I have a 96 r33 gtst series 2. Currently has 17" work's not sure of the offset.

However i dont want to do any gaurd rolling or flaring (dont want to damage the paint) so im assuming i couldnt get anything over an 18"

What size, width and offset would you recomend for stock gaurds?

THANKS :D

Ive been reading through but just getting mixed answers

I have a 96 r33 gtst series 2. Currently has 17" work's not sure of the offset.

However i dont want to do any gaurd rolling or flaring (dont want to damage the paint) so im assuming i couldnt get anything over an 18"

What size, width and offset would you recomend for stock gaurds?

THANKS :(

width and offset play just as big if not bigger roles in clearance than diametre. u can make a 20" fit if u want, u just cant go as wide or have as low offset as a 17".

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...