Jump to content
SAU Community

Recommended Posts

It will look retarded..... I sense some vomit coming up already..

Unless! You flare which would require a fair amount of body work, Low and camber tuck hard AND if you did id be pretty jealous because I wanna do it haha

I'd try something like a 18x10 with between a 0 to +10 offset, that would look amazing!

Oh and I got my fronts on today..... So happy!!!!

im gonna ask what is possibly a dumb question but im happy to hear all input.

got 18x9.5 +38 Work emotion CR Kais.

275/35 on teh back and fit fine.

245/40 stretched on teh front....and they dont get past the brakes >.<

car is a 33 SII GTS-T, no guard mods front or rear whatsoever atm.

is 5 or 10mm spacer and/or guard roll the correct course of action from here?

cheers

sean

spacers are your only option to clearn the brakes. as for guard roll depends if you need it once wheels are on.. i think you might get away with it if you put a smaller tyre 275 is farkn huge dude.. ive got 265 on a 10" and thats to much.. try a 245/255 u can even go 235 but that'd be fair stretch'd also spacers all round is not something i'd want to drive around on i hate them depending how much its not clearing by u might get away with a small slip on spacer of a couple mm.. just a thought

better advice sell them and get something with a better offset.. but if u dont do this give the above ago a post pics of result :(

lol blags.. saw u last night cruising through t/c wheels looked toughhhhh!

so with 275s the right rear fitted fine, and the left didnt >.> so light guard roll at the left rear and it was sorted. the front will be running an 8mm slip spacer and longer studs, with a touch of camber. will test drive after spacers and see if it needs a guard roll. rear looks great atm, cant wait to get em on all round :(

235 on 10" is fair stretch i had it..

batak - pizza hut called they want their pizza slicers back

sean put the wheels up for sale its really the best bet trust me u dont want to be running on spacers front and rear its shit, voids ur insurance (not that that's the major problem) and will drive like balls.

i dont think disk type matters much on cr kai's? just re reading above to.. u sure 8mm is enough that will only take ur offset to +30 still pretty high

im not running spacers on the rear... not sure where you got that from

and yes at the front. 8mm clears the brakes. 3mm didnt, 5mm didnt, 3mm+5mm (just to test) fitted and obv 10mm did. so a single 8mm will work and im happy to do that after fitting longer studs..

Skyline model = R32 GTR

Wheel Brand = Work XD9

Wheel diameter = 18"

Wheel width = 10"

Wheel offset = +18

Wheel weight = ??

Wheel + Tyre = ??

Tyre Brand = Falken RT615 Azenis Semi Slicks

Tyre size = 275/35/18

Brake rotors = Vspec II Brembos/Rotors

Modifications to fit = Front - None. Rear - lipped gaurds

th_IMG_0155.jpg

th_IMG_0156.jpg

nice offset.... will require camber OR flare, but not both

personally i'd go flare and keep the rears on the road :D

changing to +15 17x9 and +18 17x9. due to issue with brake clearance on the front (silly ap calipers)

running +23 9inch atm wonder how it go with the +18

img4559t.jpg

img4557p.jpg

here is what it looks with a 8mm split on so +15 front

img4561j.jpg

img4564r.jpg

img4562z.jpg

edit: with my front bar on

img4570q.jpg

Note: R33 gts-t with stock front guards no rolling

Edited by Kaido_RR

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...