Jump to content
SAU Community

Recommended Posts

asking whether the offset is gonna be flush to the guards.. i dont mind the wheel size

imeant they will be too skinny.... they will not sit flush at all.

i run 17's on the front's of my car for street and all round for track.

nice fitment! how are the fronts? any scraping on lock etc?

also more pic please.

cheers rich

Will post up more pics (probably in the Post a pic of your R33 thread) in a few days when I take some new pics. Fronts aren't currently rolled and there is a bit of rubbing on the guard when turning, putting new suspension in now so will definitely need a roll afterwards.

was good advice true :whistling:

It was indeed! cheers.gif fronts didnt rub at first, and I was afraid on the day because the rear guards were done and f**ked the paint completely, although it was because of rust/bog from shoddy repairs, I just wouldn't have been able to take it if all 4 corners had wrecked paint.

But thanks wub.gif they look awesome!

Thanks Hamish, yep trial fit them yesterday and fronts did stick out about 25mm, will have to change to 235 and hopefully tyre will sit inside the guard.

How did these wheels turn out for you in the end?

I'm also looking at 17x9 +22s for my R33 GTS-T, but don't want to make a mistake with all that cash...

David

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Absolutely could be. I collected data logs from when the O2 sensor was still out and also after I had replaced it so will try to compare them. Pretty confident that the affect is lowered with the new sensor, will check logs at the same RPMs/conditions. 
    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
×
×
  • Create New...