Jump to content
SAU Community

Recommended Posts

I was in a situation where my rear tyre went flat and i had to use the space saver to limp it back home.

I am running a KAAZ 2way LSD and have 18" (265/35/18).

Now to state the obvious, one side was the 18" and the other side had the space saver...

There was a constant need to adjust steering position to counter steer the force on the back under acceleration.

Could this have somehow damaged/forced/overheated my diff?

(about 20mins of 60kph driving, only 2-3 intersection turns)

:P

Link to comment
https://www.sau.com.au/forums/topic/84407-spacesaver-and-2way-lsd/
Share on other sites

What size is the space saver? I'm really surprised it was a different diameter overall? The fact your regular wheel is 18" doesn't matter its the size (height) of the tyre that makes the difference.

with 18inch wheel you are going to have an overall bigger diameter than the stock 16incher. The tyres you choose can be close, but generally still larger rolling diameter. My 19's had superlow profile rubber on them and they were still way larger than the stock 16inch rolling diameter!

I havent replaced the wheel yet as i need a replacement (the object on the road broke my rim).

So i havent had a chance to "test" if its ok, i am just concerned for the diffs well being

The rolling diameter of the 18 would have been SLIGHTLY larger than the space saver.

Most car manuals (of cars that have LSD's, staggered wheels front ot back, and a space saver), generally say that if one of the rears goes, replace it with one of the front tyres and put the space saver on the front so as to minimise the damage done to the LSD

1. Jack up front.

2. Remove front tire, replace front tire with the space saver.

3. Drop the front down.

4. Jack up the rear.

5. Replace the damaged rear with the front tire removed in step 2.

6. Drop the car down.

7. Limp home.

Sure the fronts are smaller than the rear tires, but they're bigger than the tiny space saver.

Getting back to your original post though, if you went home really slowly, not accelerating hard etc, then I'm guessing your LSD would be ok :)

Most car manuals (of cars that have LSD's, staggered wheels front ot back, and a space saver), generally say that if one of the rears goes, replace it with one of the front  tyres and put the space saver on the front so as to minimise the damage done to the LSD

1. Jack up front.

2. Remove front tire, replace front tire with the space saver.

3. Drop the front down.

4. Jack up the rear.

5. Replace the damaged rear with the front tire removed in step 2.

6. Drop the car down.

7. Limp home.

Sure the fronts are smaller than the rear tires, but they're bigger than the tiny space saver.

Getting back to your original post though, if you went home really slowly, not accelerating hard etc, then I'm guessing your LSD would be ok :)

haha its ok, i dont need a crash course on changing wheels :D

It only dawned on me that i should have swapped the front to back after i took off and noticed what was happening.

Along with having an awful low car and skirts that minimise the ease in jacking up a car with a normal boot jack sort of didnt make me want to start over again. :(

Its all good *thumbs up*

Thanks for that tip though about the manufacture manual suggesting that, id say its a good point. :)

i always though it was bad to put a space save on the front, cause the front takes the weight when you brake etc. so in an emrgency brake youll kill your self.

you shouldnt be driving on the space saver anyways, its only to get you home or to the nerast tyre shop.

steve

I did a diff in like this. The size difference was bugger all, I had a stock 15" in as the spare, the wheels were 16" 225 50 16's.

It wasn't a 2way mech or a vis skyline diff. It was a cone type lsd VS v8 IRS diff.

I fitted the spare tyre, under acceleration the car would pull one way, under braking via gears the car would pull the opposite. Got home got the tyre fixed, fitted it up. Only drove 15km's.

I first noticed the diff the very first intersection after I had fitted back up the fixed tyre, I had already started to turn and was rocking back and forth on the clutch. The arse end had a slightly wobbly clunk feel. Pretty much what a 2way mech feels like. It also was no longer LSD but rather a single spinner, something that it had never done before.

1 stuffed diff. ~$1100 or there abouts for a rebuild.

Edited by Cubes

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...