Jump to content
SAU Community

"hiscas" Light Comes On, What Is It!!?!?

DriftSquad
 Share

Recommended Posts

akeenan Grand Master

akeenan

Posted
Posted

check if there is a leak under the power steering resivoir..(??) the little bottle which has redish liquid inside... also check how much inside, should be neary full.... i dunno about r32s, (because I dont like them) but in my r33 it had a different diff and there was also a power steering fluid bottle in the boot .. if you have one of these (dont think you would) check it too

sav man Grand Master

sav man

Posted
Posted

The HICAS controlles the power stearing, there is a high speed and low speed mode. If the speed wire is cut it get's stuck in high speed mode. I had the same prob, I soldered a bridge wire from the speedo to the HICAS speed sensor wire.

sav man Grand Master

sav man

Posted
Posted

The best way to test is to get a multi meter. the HICAS box in the boot (on the drivers side in my car) has a yellow wire with a green trace, if you unplug the conector and put a probe with a extention wire on it, and put the lead round to the drivers seat. Now you need to pull out the speedo, there should be 3 plugs in the back of it. on the middle plug is the other end of the yellow/green wire. Put the other end of the probe there, and put the multimeter on resistance mode. If you get a reading your wire is fine. if not you have to find where the break is.

Dush Mentor

Dush

Posted
Posted

i had the same problem... last monday i blocked my stock BOV so i can get my car to flotter.. while drivin it the hicas light came on and my power steering stifended up... now today, i just got my Apexi BOV put on and it happend again, but this time i hav'nt blocked off the return pipe form the stock BOV in to my air intake. what should i block it off wit?? its steel so i cant really cut it...a ny idea's??

lang Collaborator

lang

Posted
Posted
My HICAS light comes on when I turn left!

I had the wheels aligned not long ago and have had the problem since....

SAME!!

my wheels are badly aligned tho, i hope getting an alignment can fix mine

sav man Grand Master

sav man

Posted
Posted (edited)
I wouldn't wast too much time with HICAS, a locking bar might be the best solution and just get rid of it.

At high speed,active HICAS can make the car feel pretty nervous.

more scary when it dosn't work, and moves under high force, or bumps in the road.

Edited by sav man
DriftSquad Experienced

DriftSquad

Posted
  • Author
Posted

so no 1 realy knows how to fix it?? i noticed in the skyline R32 the power stearing aint that light? could this be my hicas or are they always like this? or could this be because its stuck in hi speed mode?

i had a look and my power stearing fluid was 2 high.. so i dranied some and now it dosnt come on as often! tonight i had a little race with a 180 and just after it the hicas light came on...

i am still to try this speed wire test.. but i dont have the right equipment!

thanks

  • 3 weeks later...
Godzillr Enthusiast

Godzillr

Posted
Posted

I am experiencing exactly what you are experiencing Drift Squad except the Hicas subframe has been removed on my R32 GTR i.e. no more Hicas. The ECU has also been reprogrammed/chipped. The hoses were also plumbed back from where the Hicas was removed.

The car has power steering for the first few minutes and then reasonably quickly the steering becomes heavy at which time the Hicas light comes on until the car is turned off. When it is started again the above symptoms are repeated.

Any ideas?

lwells Grand Master

lwells

Posted
Posted
so no 1 realy knows how to fix it?? i noticed in the skyline R32 the power stearing aint that light? could this be my hicas or are they always like this? or could this be because its stuck in hi speed mode?

i had a look and my power stearing fluid was 2 high.. so i dranied some and now it dosnt come on as often! tonight i had a little race with a 180 and just after it the hicas light came on...

i am still to try this speed wire test.. but i dont have the right equipment!

thanks

HICAS has been covered to death on this forum. A search would have told you everything you need :P

Yes, it can be fixed (assuming the mechanicals and electronics aren't damaged). Usually its one of the following or a combination (in rough order of occurence):

1) Low powersteering fluid.

2) Aftermarket steering wheel with wrong or incorrectly installed BOSS kit.

3) Poor wheel alignment.

4) Speed sensor wire has been cut.

5) Leaking powersteering hoses.

silver gts-t Grand Master

silver gts-t

Posted
Posted (edited)
ah, the BOSS kit BTW is HBK ON-115, not the ON-110

The ON-110 is for the NON-HICAS GTS-ts (and GTS4's I think)

The ON-115 is compatible with HICAS

incorrect

if it comes with the plug its compatible and it does

last night i changed my steering wheel and when i fitted the new 1 its slightly off centre, it caused the light to come on...

easy fix though.

Edited by silver gts-t

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Dose Pipe Sutututu · Posted

      Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • Kinkstaah
      Strange issue RB25DET wont start

      By Kinkstaah · Posted

      I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • Kinkstaah
      First time Skyline owner

      By Kinkstaah · Posted

      The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • Kinkstaah
      Chris' Toyota Mark ii JZX110

      By Kinkstaah · Posted

      I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • GTSBoy
      Chris' Toyota Mark ii JZX110

      By GTSBoy · Posted

      I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...