Jump to content
SAU Community

Recommended Posts

i just bought a recent mag a HPI, its got like 4 full pages on the Z-tune. i want them rims...

They are just Nismo LM GT4s IIRC, so they aren't that hard to get.

A question to Tosh: what's the go with exporting a car already in complied in Australia to Japan, having it further modified, and bringing it back in to the country? Are there any requirements for re-complying the car?

Latest BMI is all about it

Its been floating around the interweb for a month or two. It has an interesting segment about the Z tune which details the construction and planning stages. Unfortunately, apart from a short squirt one a public road, you don't get much in the way of driving impression. Hopefully some wealthy Japanese person will buy one and loan it to BMI and HVI to test :D

The english version dvd only just got released in aus. I got my copy a few days ago with latest hot version but havent watched em yet.

That might be the case, but I can assure you the english version has been available in the usual places for quite awhile now :D

They are just Nismo LM GT4s IIRC, so they aren't that hard to get.

A question to Tosh:  what's the go with exporting a car already in complied in Australia to Japan, having it further modified, and bringing it back in to the country?  Are there any requirements for re-complying the car?

Actually they aren't just any LMGT4's... they are 18x9.5JJ +5 offset in black. Nismo do not sell these rims seperately (unless you have connections i suppose).

For comparison, a standard R34 GTR would use 18x9.5JJ +12 offset LMGT4's. The +5's look a little nicer imo.

I guess you could just grab a set of +12's and paint them black tho and voila!

Actually they aren't just any LMGT4's... they are 18x9.5JJ +5 offset in black. Nismo do not sell these rims seperately (unless you have connections i suppose).

For comparison, a standard R34 GTR would use 18x9.5JJ +12 offset LMGT4's. The +5's look a little nicer imo.

I guess you could just grab a set of +12's and paint them black tho and voila!

You can buy the LM GT4s in black (well, second hand at least): I know, I bid on a set :D For example: http://page9.auctions.yahoo.co.jp/jp/auction/k24062019

What you say about offsets is I'm sure correct, but my point was that its still an LM GT4 design from what I've seen (even if it is a different offset to normal).

Lucien.

would these vehicles only be able to be complied for race/rally as wouldnt they be way too modified for sevs

Good question - these cars are actually remanufactured by Nismo and given new chassis numbers (R34-Z-nnn). Still, I think there would be significant issues in complying one for road use directly from Japan...

Having said that, the evidence for the Skyline R34 already exists and most of that would be the same for the Z-Tune, I dont know if a RAWS could work it that way though. Powerplay would probably have done the homework...

Edited by sewid
You can buy the LM GT4s in black (well, second hand at least):  I know, I bid on a set :D  For example:  http://page9.auctions.yahoo.co.jp/jp/auction/k24062019

What you say about offsets is I'm sure correct, but my point was that its still an LM GT4 design from what I've seen (even if it is a different offset to normal).

Lucien.

Just like the rest of the car, you could build it yourself to the same spec for far cheaper

Just like the rest of the car, you could build it yourself to the same spec for far cheaper

Yep. You could do it yourself cheaper no doubt and probably even better and faster. It's more of a enthusiasts dream car than best all round GTR ever.

I still rate the Mine's R34 GTR as my favourite street GTR.

They are just Nismo LM GT4s IIRC, so they aren't that hard to get.

A question to Tosh:  what's the go with exporting a car already in complied in Australia to Japan, having it further modified, and bringing it back in to the country?  Are there any requirements for re-complying the car?

Nope, not a thing mate AFAIK ;)

Just like the rest of the car, you could build it yourself to the same spec for far cheaper

Sure,

However you definately wont get a manufacturers warranty with it.

and the prestige of being built by Nismo

Good question - these cars are actually remanufactured by Nismo and given new chassis numbers (R34-Z-nnn). Still, I think there would be significant issues in complying one for road use directly from Japan...

Having said that, the evidence for the Skyline R34 already exists and most of that would be the same for the Z-Tune, I dont know if a RAWS could work it  that way though. Powerplay would probably have done the homework...

We have ;)

it's all good

The prestige is only good for someone that is going to buy 1 and then lock it away and just look at it for the rest of its life

That's true and it comes down to the person buying it however the warranty is a fairly large advantage of this car over any other modified car.

The prestige is only good for someone that is going to buy 1 and then lock it away and just look at it for the rest of its life

I dunno about that: doesn't seem to be the case for a lot of Ferrari/Porsche/Lambo/AMG/M-power/blah blah blah cars ;)

I'd also be suprised if you could get the same level of fit, finish and detail as Nismo gets.

I dunno about that: doesn't seem to be the case for a lot of Ferrari/Porsche/Lambo/AMG/M-power/blah blah blah cars ;)

I'd also be suprised if you could get the same level of fit, finish and detail as Nismo gets.

Ferrari/porsches/lambos can be bought at any time from anywhere so there aint no big deal to the people than can afford them

Ferrari/porsches/lambos can be bought at any time from anywhere so there aint no big deal to the people than can afford them

Yeah, but you don't see them buying a 318i and installing a supercharged M3 drivetrain even though it would be a much cheaper way to achieve better than M3 performance. I think they quite like the fact its got an uber expensive badge on it.

Besides, people who buy beautiful cars and lock them up should be shot.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
×
×
  • Create New...