Jump to content
SAU Community

Recommended Posts

Has anyone got the ID tag numbers for the HKS GT2535 , 69mm compressor wheel is a little unusual but would help spool characteristics without giving away much flow capacity over 71.1mm GT35 wheels . Note it uses a T3 comp cover

instead of the Nissan style T04B cover found on the GT28R and HKS's GT-RS . Cheers A .

Nice result reflex, awesome result silva ! are you running std injectors also ?

I just picked up one these turbos new-in-HKS-box for USD$850, T25 flange. No biggie as I have a T3 .64 A/R HKS turbine housing thats a direct swap.

Looking forward to a similar result.

GT2535_won.bmp

  • 2 weeks later...
Has anyone got the ID tag numbers for the HKS GT2535 , 69mm compressor wheel is a little unusual but would help spool characteristics without giving away much flow capacity over 71.1mm GT35 wheels . Note it uses a T3 comp cover

instead of the Nissan style T04B cover found on the GT28R and HKS's GT-RS . Cheers  A .

ZI 6096J

GT2535-56T

446179-19

So HKS2535 is most efficient around 16-17Psi?

Will an internally stock RB25 be able to handle this ok?

Provided the tuning is good

I wouldnt expect the motor to last to long if you were at wot most of the time.

233rwkw @ 14psi sound like a good starter to me.

From what ive herd these turbos are a good turbo for drifting.Because of their mid range punch delivery. B)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Maybe it's time for a M3 F80 LCI, and leave it stock.  Drive it to a shop, sip on your latte with nutmeg whilst it gets serviced and on the way home swing by and grab some chai mix for the evening.
    • Great work! Thanks for documenting the process.
    • How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
×
×
  • Create New...