Jump to content
SAU Community

Recommended Posts

1996 Nissan Skyline GTS-t Series 2

Type M bodykit

5speed manual

Black

92,000klms

Dual Airgbags

Factory wheels with new tyres

Aftermarket cat back exhaust

Aftermarket airfilter

Boost gauge

Alarm

Turbo Timer

Top of range Sony CD tuner with flip down face

10months registration

Roadworthy certificate

Asking $14,900 for QUICK sale as owner going overseas

E-mail [email protected] for pics and more info

Car will be available for inspection next week (5/09)

Edited by mcboom

Got the pics, few q's...

The interior trim wear doesn't suggest 92,000 k's. Is there excess wear elsewhere on the car?

Is there *any* accident damage repairs on the car? particularly front passenger as the bonnet is not entirely straight.

Thanks

The interior trim wear doesn't suggest 92,000 k's. Is there excess wear elsewhere on the car?

I havnt seen the pictures, but...

My r34 2000 model came in with 105,000km and there is no wear marks at all on anything.

Got the pics, few q's...

The interior trim wear doesn't suggest 92,000 k's. Is there excess wear elsewhere on the car?

Is there *any* accident damage repairs on the car? particularly front passenger as the bonnet is not entirely straight.

Thanks

Interior wear depends a lot on the type of driving the car has done and how its been used. If you do a lot of city driving (ie. short trips) then the interior wear will be higher.

Not sure about accident history as this is not my car, but for the price it's a steal !

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...