Jump to content
SAU Community

Hicas LIght

HaZe

By HaZe,
in General Maintenance

 Share

Recommended Posts

akeenan Grand Master

akeenan

Posted
Posted
1) From the time I turn on the car, to the time I start the 5m drive, how many seconds do I have?

do it as fast as you can but make sure you are turning the wheel enough....if it doesnt work try turning the wheel a little more....

2) In step 5, do I hold the brake in slightly and heel-toe it foward, or tap it in and out?

tap it in and out

I've put my car into diagnostic mode many times however last week when i tried to put a friends car into it i couldnt so just keep trying!

Link to comment
https://www.sau.com.au/forums/topic/8673-hicas-light/page/2/#findComment-178035
Share on other sites
Cake Mentor

Cake

Posted
Posted

i got aftermarket wheels, hicas light comes on after 10-15 mins of driving over 80km/h, on freeway etc. If i turn the car off, and then on again it goes away. I tried getting it into diagnostic mode a few times, but with no luck.

Link to comment
https://www.sau.com.au/forums/topic/8673-hicas-light/page/2/#findComment-178518
Share on other sites
Airzone Rising Star

Airzone

Posted
Posted
Originally posted by akeenan

im dont understand what you mean here? if you are saying your rear wheels move when you are not in diagnostic mode just sitting on the spot and you turn your wheel you are wrong!

Skyline 4ws only opreates when you are travelling and not stationary unless you are in diagnostic mode!

And yet it does. Perhaps the light is coming on because of it being unable to determine the speed of the car, and for that reason the wheels move... Who knows until I can get this diagnostics mode working.

Anyway, I'm going on the dawn cruise to the gong tomorrow, so I might be able to get some info on it there...

Link to comment
https://www.sau.com.au/forums/topic/8673-hicas-light/page/2/#findComment-178536
Share on other sites
Airzone Rising Star

Airzone

Posted
Posted
Originally posted by GTR King

I wonder if it has anything to do with Engine speed vs Tyre diameter. Maybe it affects the ECU if the inputs r incorrect. Im no electrician but after what b003t said it maybe be worth asking.

Go on laugh at me but im only trying to help :]

Well I'm even less of an electrician. But they're stock wheels and I don't think there's anything special about the tyres - they're still the ones the compliancer dude put on. Aside from an after-market stereo, I believe the speed alert chime has been disabled (unless I go deaf past 110kph :D) but that seems all... Who knows. :D

I think I'll try and get a knowledgable guy / girl to try and get the diagnostics mode working... :

Link to comment
https://www.sau.com.au/forums/topic/8673-hicas-light/page/2/#findComment-178547
Share on other sites
  • 3 weeks later...
maxr33 Apprentice

maxr33

Posted
Posted

My Hicas light comes on every time after about 10km, turn car off and go again for 10 and on it comes. Rang the guy who sold it to me who checked with a mechanic mate etc etc. Turns out I have an aftermarket diff - locker apparently, and this is what happens when you mess with the original diff.

Link to comment
https://www.sau.com.au/forums/topic/8673-hicas-light/page/2/#findComment-210682
Share on other sites
  • 2 weeks later...
Zer0 Collaborator

Zer0

Posted
Posted

Hicas on the R33 is fully electric. Topping up the power steer fluid won't do anything for you.

I never had a problem with my hicas and I had aftermarket 17" wheels on. I can't see how that could possible make a difference anyway, but it certainly didn't in my case.

My car was a R33 GTST

Link to comment
https://www.sau.com.au/forums/topic/8673-hicas-light/page/2/#findComment-254933
Share on other sites
  • 3 weeks later...
NismoGirl Grand Master

NismoGirl

Posted
Posted
Originally posted by Hicks

Mine comes on sometimes when i've been driving for a while, but if I turn the car off and start it again it goes off. I don't worry about it. Get it checked out if your a bit worried.

I have this problem too..

My problem is that the contact in the steering wheel isn't making contact so the car cant sense that the hicas is there.. or something.

It only happens when I go on the freeway and drive for extended periods of time without turning the wheel too much.

It just resets the computer when you turn it off so the sensors are working again. It was going to cost me $300 to get the part and more for the install. But I'm not too worried. It's not harming the car in anyway.

Link to comment
https://www.sau.com.au/forums/topic/8673-hicas-light/page/2/#findComment-293270
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • MBS206
      new 1.5 LSD issues/concerns

      By MBS206 · Posted

      Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...