Jump to content
SAU Community

Who Should Pay?


RT33
 Share

Recommended Posts

i went to my mechanic because i needed to replace my water pump. it was ment to be a $300 job (parts and labour). the night it was done i was on my way to the central coast from sydney and.......i lose all power and my car stalls on the f3???

WTF happened??? :huh:

i spent $220 to get it towed to my other mechanic. the next afternoon i was there while they stripped the motor down. timing belt was 50% of its normal thickness. little strands and belt reminence was everywhere. the head was taken off and just as i suspected...exhaust valves were f@kt! slight scratches on the top of the pistons, but they're ok.

i sent the head to the guilty mechanic and told him to replace the valves, seats and guides.

called him today and he said he's only changing the valves. thats when i called my mum...hahaha he's afraid of her! hahaha (don't laugh! you'd be too). now those three things are being changed and it's getting a port and polish too! :P

the guilty one says he's going to pay 50%

what do you guys think???

btw its an SI r33

Link to comment
Share on other sites

I'm guessing the mechanics screwed up the timing belt while doing the water pump, which in turn caused the valves to fail. But I'm no mechanic...

In fact my mechanic friends regularly tell me that I know f**k all about f**k all. (Although when I try to tell them that the double negative in fact implies that I know everything about everything, they won't have a bar of it...).

So someone more knowlegable respond!

Link to comment
Share on other sites

so how much will you be out of pocket if you pay 50% each?

if its less than $400 or so, i would say bite the bullet and pay, then stay away from that mechanic!

after all, time is money. after months spent with lawyers and in court, is it going to be worth the stress and hassle? no.

Warren.

Link to comment
Share on other sites

You have to take the timing belt off to change the waterpump?? isnt that strange? Most cars arent like that.. waterpump runs off the alternator belt.

Excuse my ignorance (only just got my 'line and havent had a good chance to have a sticky under the bonnet :) )

Link to comment
Share on other sites

$400???? more like $1500-$2000. but thats including a port and polish. hahaha. was doing maybe a little bit over 4000rpm. i have pics on my phone but i can get them onto the computer. show the damaged valves & scrapes on top of the pistons.

it feels weird not driving my car. i drive everyday sometimes have 1 day off a week or month. i miss her!!!

Link to comment
Share on other sites

If you can prove that it's his fault ( sometimes very hard ) then he should pay fro everything including the tow . If he replaced the timing belt it maybe esier to prove .

If he refuses you can go to fair trading .

Link to comment
Share on other sites

Are you sure that is all the damage that was done? Did you ask him if he even looked at the timing belt because if he did and didnt advise you that it was old/worn he is a lame duck anyways. i'd get your scary mum ( mines scary too) to give him another rev or two and try for a better deal.

Link to comment
Share on other sites

i hate dodgy mechanics but can forgive anyone for making a mistake as long as they make good 100%

if he's doing anything by way of reparation you're lucky; you're getting something from him, but it also means he accepts liability. this is good for you in case there are more problems or you want to push for more. it's a no brainer but don't piss him off now or you'll get it back in peices. as for the port and polish make sure it's being done by someone good or or it'll be worse than ever.

the dept of fair trading is your friend in this - they can't stand dodgy arseholes any more than i can. he should make good 100% but if you've agreed to the current arrangement then there's probably not much more that you can do. if you have further troubles don't do anything with this guy, call the fair trading people and tell them the whole story. they will manage the negotiation for you - it's worked for me in the past.

at this stage however don't be disappointed, it's still a good outcome.

hope things work out for you

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Awesome to know. I have a Series 1, and When pulling my front bumper off for the first time i realised my reo/crash bar was a bit worse for wear, and was going to try pick up a better one soon just so i can replace it. Someone is selling a full series 2 front bar and brackets for a decent price, so was going to probably reuse my brackets and install the new second hand reo/crash bar. I also have a genuine Altia body kit to do up, spray and put on, and not sure if that will use the series 1 or series 2 brackets for the front bumper, so having both will be handy, and knowing i can drill holes out to make stuff fit between series is also handy to know!
    • I should also say that the while they are different the only parts that matter are the center headlight supports and center bar from S1 to S2. The center bar will work, but the S1 has holes that clips go through into the S1 bumper. So if you were super cheap you could simply drill the S2 bar. Same thing with the side/wings. They have slightly different 'clips' but can be made to work. The center headlight brackets however, cannot. This is also where the GTR differs, which has a different center bar, and different headlight supports (to either GTT system), it also has different 'wing' headlight supports which is what I am calling under the headlight. However those CAN be made to work with the GTT Reo for a GTR front bar by a small spacer and a drill/tapping a thread into the reo because the bolt positions are slightly different. So people only really need the center brackets to go between GTT S1, GTT S2, and GTR if you are happy to do some tinkering.
    • Indeed  😃  Appears the site is back up now (migrated not updated) - kudos @funkymonkey & @PranK
    • If this, then this You can't really get away without it. There are hacks that you can do in Nistune, but things are much easier with the sensor than without it. If you're not planning to Nistune the ECU, then stop right now and add it to your plan anyway, because the ECU is going to shit the bed over the missing ABS and TC computers that it expects to see, and you need Nistune to stop it chucking all its toys over the side of the crib.
    • hey guys, so ive done a complete +t conversion using mostly stock parts on my rb20de neo r34.  Im wanting to know if a boost pressure sensor is needed? Seems like the engine cuts out when i try to do a pull and I have a feeling its because a boost pressure sensor is missing. I'm using a stock r34 rb25det neo ecu.
×
×
  • Create New...