Jump to content
SAU Community

Recommended Posts

Looks good.

What paint effect is that on the plastic dash cover and are those the stock front seats with new leather seats covers?

Its a one off coating colour that is bonded on .exactly the same as the wood effect you get on new cars etc.its not a stick on kit you can get this will never peel or crack or fade.

The seats are stock that have been leathered

Trim World in Coburg Rod Clarke.He was the cheapest and by far the best in Melbourne.

Cheers

post-20920-1126056681.jpg

well you nearly made me crash this mornining i was too busy trying to see if that was the car as i was going round the bend not paying attention haha! yeah well i go past at 6am so i am not too sure u would like me poping in but u might see me around i have the black r33 with skyln plates i as i said i drive past there all the time

well you nearly made me crash this mornining i was too busy trying to see if that was the car as i was going round the bend not paying attention haha! yeah well i go past at 6am so i am not too sure u would like me poping in but u might see me around i have the black r33 with skyln plates i as i said i drive past there all the time

Sounds like you might end up in the kitchen for breakfast one morning with us if ya take that bend to wrong.Ha Ha

Catch you around

post-20920-1126058110.jpg

post-20920-1126058304.jpg

post-20920-1126058373.jpg

Edited by SIK R33
Its a one off coating colour that is bonded on .exactly the same as the wood effect you get on new cars etc.its not a stick on kit you can get this will never peel or crack or fade.

The seats are stock that have been leathered

Trim World in Coburg Rod Clarke.He was the cheapest and by far the best in Melbourne.

Cheers

How much was it for front and rear?

That ultimate auto trim in Dande charge around $500 for front and back for single colour

How much was it for front and rear?

That ultimate auto trim in Dande charge around $500 for front and back for single colour

$500 for leather seats front and rear? thats cheap as!

mind if i ask how much for the re trim job in the photos? looks hot. definitely my kind of style re trim

$500 for leather seats front and rear? thats cheap as!

mind if i ask how much for the re trim job in the photos? looks hot. definitely my kind of style re trim

Thats just leather seat covers which go over you current seats.

A full retrim is more expensive, but from the cars i have seen with those leather seat covers you cant tell the difference

Thats just leather seat covers which go over you current seats.

A full retrim is more expensive, but from the cars i have seen with those leather seat covers you cant tell the difference

ah ok. was gonna say $500 sounded way to cheap. more like $2-3k for a full re trim like the 1 in these pics i rekin...

Jar, i want those tail lights too, and i dont have a skyline yet lol! i rekin they'd look hot as on a black 33....

very similar to whats on the novitec rosso 550 maranello

post-22515-1126071835.jpg

Thats tuff, good job bruv!! I love the interior, very nice how u added the GT logos!!!

Did u get the rear lights from Viva Garage?

What they set ya back?

Thnkin about them for mine, but dont wanna pay $900 Viva wants for them!!!

Thats tuff, good job bruv!! I love the interior, very nice how u added the GT logos!!!

Did u get the rear lights from Viva Garage?

What they set ya back?

Thnkin about them for mine, but dont wanna pay $900 Viva wants for them!!!

The GT logos on the seats are a custom embroidery on one of the leather panels of the seat cost about $4.00 each.The GTS on the dash spare switch plug was done by a friend who has a trophy shop.approx $10.00,The GTS on the fromt grill again from the trophy shop app $15/20. and the best ones are the stainless steel GT on the front wings they cost me 2 pounds for both from a mate in the UK.

The Clear lights for all the guys that have asked.We are looking at retro fitting clear lenses here in melb on a change over basis.We are just doing tests at the moment along with making tooling.Otherwise they are obscene in price as rear as hens teeth and take 6weeks plus to deliver ex Japan.If Viva garage sell them for $900.00 that is the cheapest I have heard them available for as ridiculous as the price is.

We were lucky in being able to do a deal with the supplier for the ones on the R33 and I wanted the car to look differant with the rear lights being one of the best ways to do it although also the hardest to find.

We did the same on another car we did at the same time a 300zx pics attached.THAT REALLY LOOKS DIFFERANT FROM THE BACK AND THE LEDS NEARLY MAKE YOUR EYES BLEED IF YOUR BEHIND IT AT NIGHT.

CHEERS :)

post-20920-1126115169.jpg

post-20920-1126115355.jpg

post-20920-1126115494.jpg

post-20920-1126115696.jpg

post-20920-1126115846.jpg

post-20920-1126116085.jpg

Edited by SIK R33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
×
×
  • Create New...