Jump to content
SAU Community

Recommended Posts

tommo. Airflow meter issues?  bad connection?  Did the eng warn light come on or do you know how to do a diagnostic?

Nah - no engine warning light. It seemed to fix itself on teh way back and is defintely less prominent now.. but still there. I'll check it out tomorrow anyway, i'm sure it will just be something small :P

  • Replies 128
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Um, cruise the great western, go onto m4 for a bit go up Springwood twisties, through to windsor then down through blacktown and go to paramatta rd. That would be an example of a typical night cruise for my mates.

Um, cruise the great western, go onto m4 for a bit go up Springwood twisties, through to windsor then down through blacktown and go to paramatta rd.  That would be an example of a typical night cruise for my mates.

I'm suprised I haven't seen your car on the Great western?

Myself and mates from www.gunnamotorsport.com are out there every Saturday night finding runs (if the pub doesn't grab our attention first)

that sounds like a good drive anyway

I passed you guys this morning on my way to sydney, I was in the R31 GTS1 between williamson springs and bathurst, almost broke my neck trying to check you all out.

The blue S15 flashed me on my way home on bells line too, g'day to whoever it was :)

yeah saw the pics you posted on pg5, I thought there may have been cops ahead but it was just another friendly cruiser punishing beels line.

Going west bound on a sunday arvo is tops, everyone is heading the opposite way.




  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...