Jump to content
SAU Community

Recommended Posts

yeah the black is very nice, cant see the black around the tail lights, only gloss but its lovely, still tryin to figure out why i swapped the ceffy for it haha

Yeah think it might actually squash ants, the exh has been flattened from 3" to 2.5" through the mid section and my god when i took it for a ride it was like doing a down drive over large boulders, nearly threw me out the window, the shocks in the coilovers have bottomed out so there's no more suspension travel left, felt awsome drivin it though, but couldnt leave the carpark coz it does get beached on speed bumps hahahaha

post-53074-1232640209_thumb.jpg

post-53074-1232640229_thumb.jpg

post-53074-1232640160_thumb.jpg

Stock auto RB20DE A31 Cefiro on stock S13 shock and springs.

I've spent the last year bringing her back up to scratch... even got into a relatively minor accident that rendered her immobile for a short period.

Should install my staggered Stich Gulf 17's shortly which will be followed by upgrades such as fuel pump, brakes and coilovers (I'm still considering their priority) to support the engine that is to come. The plan is to install a R33 25DET which will go in when I collect enough funds, it will remain "stock" until I can afford management (hoping for a 2nd hand Power FC but my budget is extremely tight) and only then will I begin to add bolt ons.

  • 2 weeks later...
hey, new to this, thought i would put up my A31 :D

With new front grill

DSC00231.jpg

Tell us what you think,

Cheers MackOo :(

Nice clean ride! Love those window visors...where can i get a set of those?

^^^ Probably Yahoo Japan Auctions, but at the exchange rate this low I wouldn't bother.

Couple of my 4dr with the 'auto-spoiler' fitted and painted in satin black. I think it's unique.

DSC_0343.jpg

DSC_0351.jpg

^^^ Probably Yahoo Japan Auctions, but at the exchange rate this low I wouldn't bother.

Couple of my 4dr with the 'auto-spoiler' fitted and painted in satin black. I think it's unique.

DSC_0343.jpg

DSC_0351.jpg

nice clean and subtle. :)

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...