Jump to content
SAU Community

Recommended Posts

JapanC33Bagged.jpg

i hate this laurel!!!

i thought i was happy and knew what i wanted with my laurel. and ive never really been a fan on smaller diameter wheels and lots of stretch. but f**k im seriously thinkin of sellin my eurolines, my 5 stud conversion and my 33 brakes.

so that i can do this...

October-Drift-Attack-224.jpg

f**kn hot shit.

my rig almost done with what i want. the height was set in osaka before a 1000km road trip fully loaded ready for 160km/h cruising (with decent bumps n shit on the highway), flamin mongrel had 8 tyres in the back with a diff, tool box, 4 rims with tyres on them in the back seats with all my luggage, knuckles, hubs, spare parts etc etc, by the time this pic was taken it was almost fully unloaded so probably an inch higher than when i set off in osaka :( but was about to leave so didn't bother resetting the height for a photo.

382114_10150402477843744_733698743_8436438_157502445_n.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...