Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Is that your 33?

sure is, had it a few months now

Ceffy getting some attention kriss? What size/offset do you run on the 33?

yeh done GReddy plenum, Q45 TB, Tomei rail, bigger injectors again, just needs cooler piping and tune now

wheels on the 33 are 17x9 +17 all round with 225/45's, will get some better pics once new front bar is on it

Do you have adjustable arms and shit? Mate has a 33 four door but he's retarded with wheels so I'm sorting that bit. Only thing he wants is cst's but he's nuts about scrubbing and stuff. Trying to work out wether to get 9 +15's all round or play it safe to avoid his whining and get the +30's. Be 215/45's on the front but no adjustable arms.

Good to see the Ceffy getting some attention! I'm too broke to do anything on my laurel.

+15's will be poking and definitely scrub. Depending how low it is too, without guard work the tyres will be touching the rear guards. If dudes paranoid about rubbing would be better off sticking witth +30's they will still look decent enough,

Looks tough, need more pics!

thanks man, fresh painted type M bar goes on tnight so will take some pics this weekend

Do you have adjustable arms and shit? Mate has a 33 four door but he's retarded with wheels so I'm sorting that bit. Only thing he wants is cst's but he's nuts about scrubbing and stuff. Trying to work out wether to get 9 +15's all round or play it safe to avoid his whining and get the +30's. Be 215/45's on the front but no adjustable arms.

Good to see the Ceffy getting some attention! I'm too broke to do anything on my laurel.

nah all standard arms man, 9 +15's will be fine, mine doesnt rub at all anywhere and the rear even has room to go to a 235/45 which i will be doing, just go 215/45 fronts and he'll be sweet

haha nah no build threads for me on SD, 33 will be up for sale soon anyways i want another R31, QLD raceway is deff on the cards though this year maybe

just for peice of mind this is my mates sedan with exactly same size wheels as mine but hes alot lower and he runs 215 front and 235 rear, with full car load of people it still doesnt rub, also all standard arms

7F7EC3C2-8790-4FAD-ACAA-647F52DBD39E-208

4A0CC30B-4C04-4487-A436-73FF00A4FF24-208

0B599AE8-82D0-49A3-A096-EAE6960BCCA8-208

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...