Jump to content
SAU Community

Recommended Posts

Aluminium FMIC Piping Kits!

Free Shipping Australia wide!

After many interested emails we have been able to source these from an overseas manufacturer.

Made from 6061-T6 Aluminium these piping kits are to suit the following cars:

Kit One

Silvia /180sx (SR20DET)

Kit Two

R32 (RB20DET)

R33 (RB25DET)

R34 (RB25DET)

Pictures are here: http://www.justsr.com/forum/viewtopic.php?t=119

The pipes are made from all Aluminium and the kit includes blue silicon hoses and all necessary clamps.

Both cast pipes and stainless steel do not have desirable thermal characteristics – as a result these kits are all aluminum. The chrome and power coated pipes risk you having bits of paint and/or metal come loose in your pipes – these kits are polished not chromed!

I have a demo sets in Melbourne now – if you wish to inspect before purchase please email me!

JustSR.com PRICE **REDUCED** $370 + Free Shipping Australia wide!

They are in stock now, ready for immediate delivery.

Email [email protected] to arrange purchase!

We will beat any advertised price on these :huh:

Link to comment
https://www.sau.com.au/forums/topic/87328-aluminum-fmic-piping-kits/
Share on other sites

I am interested in the R33 kit,however if you can answer a few questions to help me in my decision process it would be appreciated.

*What type of FMIC would this kit suit e.g HYBRID style etc?

*Does the piping go up and over the engine or is it the factory route?

*Do they come with fitting instructions?

Thanks

Peter

Hi Peter

These kits are designed to fit up with the hyrid style coolers.

The piping goes over the engine like most other FMIC piping kits

I dont have printed fitting instructions but I am on hand 24/7 via phone and/or email if you need any install advice.

Please email me to arrange purchase!

  • 3 weeks later...

hey, im interested in a kit for a r33 gts-t. Do you know if this kit will suit the coolers that just jap is advertising in the group buys as well titled "New Universal Intercoolers - Only $175 Delivered - Huge Shipment Arrived!" Also you say it bolts straight on but do you have to cut the engine bay where the pipes go from the pod filter down to the intercooler. I've read that alot of people have had to chop up their cars a bit to make them fit. I just want everything to be neat.

Your probably better off pm'ing me so i dont forget lol. Thanks

hey another question. your piping kits for the r33 gts-t, i have the stock plenum chamber so i just wanted to make sure it was designed the standard position not next to the engine with aftermarket plenum chambers. Also i want to keep a plum back bov on for legal reasons so is the piping suitable for a plum back with an entry point or only atmospheric.

Thanks for your help

ow sorry and to add to that atm ive still got the stock exhaust manifold and low mount stock turbo. Will the piping be suitable and when it comes to upgrade will i need to buy new piping to fit a bigger turbo or top mount

  • 3 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...