Jump to content
SAU Community

Recommended Posts

I'm considering upgrading my R33 GTS T sedan to an R34 G TT sedan. Problem is I'm worried I won't be as satisfied with the R34. I have not seen an R34 sedan in the flesh yet but I'm planning to find one somewhere in Sydney over the next 2 weeks. Couple of questions for U out there.

Does an R34 have more potential than a R33 with basic mods ???

(Exhaust, pod filter and partition, increased boost).

Does the R34 have a better turbo ??? What is the safe limit in terms of psi U can push the turbo on a R34 (With a fuel cut defender installed) ????

Is there a kit available so you can put a 200SX 6 speed behind a RB25DET R34 ?????

Link to comment
https://www.sau.com.au/forums/topic/8745-r34-g-t-t-thresholds/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Keep in mind the 34 will be heavier than a 33.

34 would have a fresher motor, has NEO...how much potential in this case depends on how deep your pockets are.

34 has a poly-nylon (plastic?) compressor instead of ceramic that the 33 has. I think general concensus from 34 owners on a safe level would be 12psi...although 1bar on street use is ok. Track work you'd be best to dial it to more like 8psi.

Why would you want to put a 6speed from the 200 up to the RB?

They are fragile boxes when it comes to taking power. Stick with the stock box until you break it.

In stock form the GT-T has been running quite fast at the drags, they seem to have a good amount of power. Potential on these haven't really been tested too much here in Oz, but I know of a few people starting to use them for track-use, so they must have potential.

Wouldn't bother with the 200SX box, and keep boost to about 12psi, it is inefficient above this and will actually reduce power, we tested it on a dyno.

See'ya:burnout:

Originally posted by GTS-t VSPEC

Wouldn't bother with the 200SX box, and keep boost to about 12psi, it is inefficient above this and will actually reduce power, we tested it on a dyno.

See'ya:burnout:

so you reckon past 12 is not worth the bother nor the risk?

was this on stock cooler?

Cheers.

Nah, this was with aftermarket cooler. Most turbos have a best boost that they produce effieciently. If you push past this point then they make more boost but they also produce lots of heat, which means that the power ends up being reduced. 12psi is enough, the car is getting low 13's on this setup, without any mods other than exhaust and cooler, no bad for a stocker.

See'ya:burnout:

ed,

Yeah it is possible, this guy only has 208rwhp, which is just a bit more than stock, but it is just the right amount to get to the floor without lighting the rear tyres.

Launches are all important, improved my time by .5sec just by learning to do it properly, still more room for improvement.

See'ya:burnout:

wow, I gotta get new tyres. I got 235 Ziex and they S*&K...

All I gotta do is just put my foot down and the back squirms in the dry with TCS ON! :P

Might see if I can get some 255 FM901's on there :P

Yah, I'm still learning how to launch :P

I found 2,000RPM was the best for launching with my current tyres! :uh-huh:

Originally posted by ed

wow, I gotta get new tyres. I got 235 Ziex and they S*&K...

All I gotta do is just put my foot down and the back squirms in the dry with TCS ON! :D

Might see if I can get some 255 FM901's on there :D

Yah, I'm still learning how to launch :)

I found 2,000RPM was the best for launching with my current tyres! :uh-huh:

you sure the tcs is working ed? i dont get any wheelspin until i switch it off! Not even at 4000rpm.

Originally posted by ed

hey got any pics of it?

Many GT-T's being brought in?

there are a few coming in to melb. i know of a nicely modded white one thats for sale soon. It has the a/m bonnet with air ducts, fmic, rear GT wing, lowered and maybe wheels etc...i think it will be going for around 37k but this is a 2 door - sorry blukie

hey franks who tuned your power fc?

your af ratio could be set alot better than that.

Heres my dyno run from last week.

My mods are Full zorst + custom dump pipe, s-afc, K/N Pod HKS FMIC + Piping.

Green is with 0.9 bar boost

Red is with 0.5 bar boost and this was on a 28 degree day at 12.20 pm

attachment.php?s=&postid=127544

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...