Jump to content
SAU Community

Recommended Posts

Hi, Rob

you should able to meet your goal, however you might have to consider get a aftermarket equ-ength (spelling?) of manifold made up..coz the gas will flow much better then stock..

Originally posted by rob77

I have a td06-20g with a 16cm2 exhaust housing. It should be tuned in the next 4-5 weeks, currently sitting on the stock manifold and with a stock ecu. Makes 344hp @ 13psi, full boost by 4600rpm. I expect boost to come on quicker once the ecu is fitted, if it isnt much better I'll look into a tubular manifold. I'll let you know how I go, but I expect to make 360ish with the ecu and around 14psi.

Good to read about these buildups, like Steve's 3037, bbenny's 2530 and Rob77's TD06. Really gives some good reading, and shares alot of (expensive) knowledge.

There should be a few more project writeups soon, with Roy's new hairdryer, Akira's quest for a decent tune with rice, GTR STI's animal, my brother's and my own street car....and the list goes on.

I agree this section, forced induction performance, seems to be the best read and most information packed. The state sections tend to be filled with whore crap. Its good to see so many r33's been taken beyond the stock turbo, the more people who do it and then post their findings the more information we have and the easier it becomes for others to decide which way to go. Went for a blat this evening to get some petrol and milk and shit to keep the preggers wife happy and shit my car scares me sometimes... so much power and so little traction :D Although gtst-vspec has less traction than me, we went fishtailing down the road yesterday on the way to picking my car up from the panel beater after some truck driver wacked my car outside work. I am hanging out for my ecu now, then I can scare myself some more ;)

I had drive it tonight..

took off at 1st gear rev till 7000 hear the wastgate open shift to second heard it again shift...and it's keep throw me back to my seat , lag is there, but down shift will make it easy to drive..the boost so savage.....so hard...i would not take any elder in back seat, who might need a neck reconstruction after have a lift..

When the it's on boost and pass a big left turn, I need to keep the throttle steady..coz I can feel the car start to sideway....need to slow a bit, I have FM901 235 all around, and now I am thinking about some semi slick now..

what a great night..

i know of a car running a t67-25g (similar to tdo6-25g) on a rb24. hes not running a/m ecu yet and doesnt really have that much lag but it hits pretty hard. he spins his 255 semi slicks in the dry on boost in the first 3 gears,while only running 15psi. pretty scary considering hes getting a powerfc and boost up to 22-23psi.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Block bump. $400. As above cyl 6 needs bore or sleeve.
    • I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...