Jump to content
SAU Community

Recommended Posts

Does that mean we have to go out and source one ?

SK : Any ideas where I can easily obtain one and how much except a wrecker...

Try the "For Sale" and "Wanted" forums, then it's import dismantler time.

:wave: cheers :wave:

  • Replies 322
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

My workshop actually had two front ones lying around, and I had to source the rears from a wrecker. Tracked them down within 24 hrs. These are readily available with so many people pulling the stock suspension out and putting coilovers in. I'm not 100% sure but I think R33 caps fit, so you shouldn't have too much of a problem...

My workshop actually had two front ones lying around, and I had to source the rears from a wrecker. Tracked them down within 24 hrs. These are readily available with so many people pulling the stock suspension out and putting coilovers in. I'm not 100% sure but I think R33 caps fit, so you shouldn't have too much of a problem...

Ok sorry if I sound confused :P

Can I use the ones already on my car, yes they are stock.

  • 4 weeks later...
Mine say R33 GTR for rears and R33 for fronts.

I ordered for R34 GTT.

Is this ok ?

Yes

The R34GTT has the fork style on the shock bottom, so we have to use the R33GTR shock body.

Front is the normal eye, so we use the R33GTST shock body.

:O cheers :laugh:

Edited by Sydneykid
  • 1 month later...

There area limited number of rear Bilsteins in stock, so move quickly or you will miss out. No production planned at Bilstein Germany until after Xmas.

:dry: cheers :D

Are the fronts still avaliable Gary? :) Interested in whole set front and rear. I'm talking about the shocks. :no:

Yep, both front and rear shocks are currently available. PM me for details

:) cheers :)

  • 1 month later...

buy some special SK bilstein shocks ppl's... you know you want to...

:D

swaybars would be the whiteline items if i'm not mistaken, check the first page for part numbers.

Just a note that I have the Whiteline springs from this group buy for sale if anyone wants them. They are brand new and have only been taken out of the box to been have a look at.

I'm after $250 plus postage so if you're after a set of springs PM me and save some dollars. :D Hope you don't mind Gary. :D

  • 3 weeks later...

hey sydneykid. i just saved up enough to get after market suspension and have heard what u got here is one of the best.

i dont know exactly what i need i was wondering if u could help us out.

hey sydneykid. i just saved up enough to get after market suspension and have heard what u got here is one of the best.

i dont know exactly what i need i was wondering if u could help us out.

PM sent

:laugh: cheers :P

Hey, can you tell me where I can find your suspension settings? Have seen them before but can't remember where.

Thanks Wogboy

Page 1 of this thread.

;) cheers :huh:

  • 1 month later...

Sorry guys I have been on holidays since the 20/12, I will get around to the hundred or so PM's over the next few days.

I don't have definite delivery date for the Bilstein shocks, but they have been produced by Bilstein Germany, so it is only shipping time. As soon as I have a confirmed date I will post it here.

All other items for R34GTT's are available.

:) cheers :(

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...