Jump to content
SAU Community

Recommended Posts

  • Replies 103.8k
  • Created
  • Last Reply

Top Posters In This Topic

  • GTS-t VSPEC

    20904

  • Nizmo

    13582

  • SHUTO-BOY

    6636

  • skyzerr33

    5353

Originally posted by Pva_Glue

... so what do you wnat me to buy?

No expert, just don't trust sales droids, so I'm forced to do my own research :D

Honestly, if you're going to use your telly for sound and basic composite video for video, then a strathfield-priced player will do everything you want. CD/CD-R/SVCD/DVD/mp3s and region free at a low price. Like rev said, the mpeg chipset and board these players use (mostly zoran?) are off the shelf, so theres not much design for them to screw up.

If you're more of a name brand type person (safe way to go), then low end Panasonic and Pioneers would be my pick. Panasonic may not play mp3s but both should be region free (ask the salesman and bring a test disc just in case). Price for them should be similar ~$350. If you have a Myer or DJ shareholder card, ask them to price match and use the card. Otherwise, break the balls of a local retravision or hardley normal sales droid for a good price.

Originally posted by macka

how does that work?

Macka - DVD rom in computer which will play absolutely anything.. connect to tv via svideo output from video card.. connect to surround sound amp via optical output from sound card for 5.1 surround..

easy.. :D

Originally posted by caminperth

me out too.. time to do the long distance phone call thing to malaysia...

gonna cost me a bomb..

nite all

not as much as Korea... it cost me arm and leg every time I call me parents...

damm telestar they charge shit loads compare to other country telecom :):D

Guest
This topic is now closed to further replies.



  • Latest Posts

    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
×
×
  • Create New...