Jump to content
SAU Community

Recommended Posts

hey riaz, im back

Yeah i know about the number kms ect but i dont really care just wanna get it working some time in the future for now, I want to get my headlights fix, and back light fix, along wit the brake light in the Wing?

Did u find out about the part? i had alook at tring 2 open it but it doesnt look like it is glue togother and i didnt want to crack it

  • Replies 103.8k
  • Created
  • Last Reply

Top Posters In This Topic

  • GTS-t VSPEC

    20904

  • Nizmo

    13582

  • SHUTO-BOY

    6636

  • skyzerr33

    5353

its too hard to explain over the phone so you gotta take it to autoworx along with the LED unit, which unscrews from the wing. and then you gotta heat it up and then open it,

and then reseal with sikaflex etc. but thats the cheapest way to fix it as they are expensive

not to sure yet, as im still looking at what to get, ken can get me a set of aus spec coilover for around $2,000, but i might just get aset of HKS HyperMax II as they around only $1,700 and with the shipping/gts ect it should only be alittle more than the aus spec ones, but im also going 2 look at the apexi ones 2

hmm so your p roject will basically be $1000 for the car $4000 for body repairs $2000 for spray

$2000 for Sr20

$5000 of labour and small things required for conversion

$1200 for wheels

yeah you will want to be driving that on the weekend from the look of it.

and your line will still beat it.

I think coilovers are major overkill especially when paying new prices for them,

paul might even have a shock sitting round for like $30 thats a better way to go.

i mean with your project car and all. Do you own mcdonalds by any chance??

your front lights arent in place right because they have been sikaflexed in place but whoever installed it originally.

so if you want to heat it up or cut them out and then mount them again, feel free, but i can tell you know its alot of messing around.

i would have done it, but its too much fiddling and also wiring the lights etc was all too much to do after all the stuff i did to make it presentable and clean and neat

riaz, its a project car which means it doesnt have 2 be ready untill along time away. I want to get the coilover 1st before anything else.

Im looking to get the a86 in about 3months do alot of the work myself and learn on the car.

I just wanna get the coilovers, with hieght adj. so it kind of solve 2problems

not to sure yet, as im still looking at what to get, ken can get me a set of aus spec coilover for around $2,000, but i might just get aset of HKS HyperMax II as they around only $1,700 and with the shipping/gts ect it should only be alittle more than the aus spec ones, but im also going 2 look at the apexi ones 2

$2000 isnt much for u?

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...