Jump to content
SAU Community

Recommended Posts

washes arnt to expensive these days

$25 a month aint bad

then when you get home you can do the polishing

Meh: I only work about 12 hours a week at the moment, so $25 is too rich :) Still, that good value considering you probably wouldn't get out of a full carlovers cycle with much change from $15-odd (plus your own labour/time obviously)

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

YAY I just washed my car today!...

Its nice and clean! Took about 45mins.... And two buckets

Same, washed both my cars. Got it down to an Artform using the buckets. Only takes about 20mins. But now I'm all shiny and I got nowhere to cruise to and no-one to hang out with :(

I wash the wheels like 2-3 times a week though.....does wonders for the overall "cleanliness" of the car...

Agreed

I wipe my wheels down every time I get home. LOL

Don't ya just hate it when someone gets the same wheels as ya ;) lol

...and hey you were supposed to sell yours!

For the first few years after I got my car (bought it new), I used to wash my Corolla once a week, but that was years ago when I used to have to park under trees, etc. and the car used to cop a lot of bird crap and tree sap.

Also, I was still in "New Car" stage, and as much as I'd like to still keep it looking clean (it still is in pretty good condition after 11.5 years of ownership) I really couldn't be bothered washing it myself, so now it's roughly once a month at the local car-wash - $15-25 isn't too bad considering they do a decent job and I KNOW that they're using water a lot more efficiently than I could for the results... I should make a note to have it done again this week, actually.

Also, what's the best ways of getting food and dirt stains, etc. off my seats and interior? Can anyone offer any suggestions? I was thinking of buying a steam cleaner, so is it worth it and will it work? I really want to get it looking neat for my satisfaction, and because I've had interest from someone willing to buy the car off me (which is a weight off my mind when I go for a new car). There are a few minor issues, such as that, which I'd like to get sorted out soon.

Cheers,

Nick T.

does anyone use thouse car wash/cafes?

i dont trust some places...

for example if they dont use clean sponges or chamois..

theres a place on canterbury rd at belmore that always has very expensive cars in there getting washed, id imagine they do a good job...

dont know how much though

I wash my car once every week takes around 3 hours

i usually just clean inside, armour all, wash car then wax. is there anything im missing out on

my friend at work was telling me there was 3 phases of waxing any1 else know about that?

every week ...coz I have a leaky tap so I had a bucket underneath to collect water, it usually fills up by the weekend and the car usually collects a layer of dirt by then. didn't wanna waste water by tipping it out so I just use it to wash my car..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...