Jump to content
SAU Community

Recommended Posts

Hey pple, i just bought my Skyline, (from a dealer)

Its a '95 (series 1.5) GTS-T, 77000kms

Its gotta a bodykit, adjustable suspension, (might be coilovers, guy said it was worth 4grand, but could obviously be bullshitting), Manaray 17' rims

2 years warranty

manual of course!!

$17,250! on the road (16 for the car in case ur not from VIC)

(see attachment for PIC)

I know its too late but is that a good deal

Also need some advice, how much should i be paying for a brand new blitz turbotimer and how much for a second-hand no-name brand one.

Ive also had some conflicting advice regarding the compatibility of turbo-timers with immobilisers and alarms. Ive been told that i might need to buy some kind of adapter thing so that the alarm arms itself after the turbo timer has finished. Is this true, (The alarm im getting is the mongoose M60S)

thanx for any input, it would be greatly appreciated

Edited by Taso84
Link to comment
https://www.sau.com.au/forums/topic/90018-just-bought-a-skyline/
Share on other sites

looks nice for sure, good deal with warranty and all

imo wouldnt bother with the turbo timer for the complications u have listed bit of a gimmick just dont thrash it in the last few minutes of driving b4 turn off

if u want some power look at a 3" exhaust system or somin, if doesnt already have, but yeh nice car!!

Yeah to have the immobiliser and turbo timer work in harmony you will have it wired up specially. Something about a relay....there was an article about it on here a while ago but i cant find it anymore..

I took mine to my local car audio electrician (Alberts) and they rigged it up for $80 (also got my hand thingie re-coded at the time).

Now the immobiliser automically arms 45 seconds after the turbo timer turns turns off. Much better peace of mind.

looks nice for sure, good deal with warranty and all

imo wouldnt bother with the turbo timer for the complications u have listed bit of a gimmick just dont thrash it in the last few minutes of driving b4 turn off

if u want some power look at a 3" exhaust system or somin, if doesnt already have, but yeh nice car!!

The guy reckons he can switch over either a 3.5' or 4' exhaust from another skyline after they're done with compliancing. He says he'll do it for $350. U reckon it will be worth it? I've got 3 to pick from, should i just go for the best sounding one, or just the bigggest one?

Thanx for the tip with the turbo-timer, it does sound like a bit of a gimmick. Not worth all the hassels i reckon too.

Mines a laserline system - dont ask the version, i dunno.

I agree, if you aint gonna fang the car around at events and such a turbo timer really is just rice...how hard is it to sit around with the keys in for an extra 45 seconds anyway :D

If your alarm has a turbo timer interface then it may be easier than u think to hook it up, could just be a matter of connecting the timer to the alarm (correct me if im wrong). Obviously you'l need a manual specific to that alarm to tell you what goes where though.

3"/3 1/2" exhaust is heaps if you dont plan on running large'ish boost figures...imo a smaller exhaust sounds nicer than a larger one :D

Oh, and heaps of information about the whole TT + alarm issue can be found here :

http://www.google.com.au/search?as_q=timer...com&safe=images

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey everyone, I recently bought myself a 2001 Nissan Stegea M35, and I've had a few issues that I had to fix, my car would start intermittently and I had a bad rocker cover leak, after a couple days of looking I finally found a part number that interchanges with the OEM starter as the OEM starters at $1300 and I can't afford that, this starter was only $270 and I replaced the start and still had the same issues, I posted a video asking for help online and it went very well, some guy said it was probably a bad ignition switch so I took my dash apart and turns out my ignition switch was half screwed in and was loose, once it was tightened it fired right up, I found a local place called "Boost factory" and they sold me a part of OEM Nissan rocker covers, they were $600 which was a shocker but I couldn't find them anywhere else, so I installed them and fixed my oil leak as the old rocker cover was cracked and warped, I now need to replace my boost air inlet hoses as they have some cracks.
    • I am being real ocd and do not want to make amy mistakes so appreciate all help provided. I am overly cautious so asking for opinion even if i know the answer   few questions,   1.re tensioner, should spring be greased lightly?    2.tensioner has two washers , one pressure washer and other has recessed/ seat. I am going to put the recessed one facing tensioner where edges are cut out and pressure washer on top   3. my car has custom triger kit sold few years ago by guy who initially built the engine. I moved the crank gear and it moved in and out easy, only way to remove belt is to slide the crankshaft gear forward which I did. I have seen these being very tough to move , anything to do with my woodruff key?   it has a crank sensor shown in purple which I assume reads from the 12 teeth position mounted to the crankcase gear   4. timing belt doesn’t have arrow stating front or back just a arrow which I think is direction of rotation . Do you agree?   5.i figured out why my crankcase cover was worn as there was no washer installed over the crankcase cover before the harmonic balancer was put in place. It is missing, anyone knows the part number? It looks like this https://justjap.com/products/genuine-nissan-crankshaft-timing-gear-rear-plate-washer-nissan-s13-ca18-a31-r32-rb20-r33-r34-c33-c34-c35-rb25?currency=USD   https://tinypic.host/image/IMG-4535.382Zy2 https://tinypic.host/image/IMG-4537.382dSz https://tinypic.host/image/IMG-4534.382q4U  
    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
×
×
  • Create New...