Jump to content
SAU Community

Recommended Posts

There is an EXTREMELY detailed and very good write up about anti-lag systems in Zoom magazine No. 59...

The anti-lag is stressful on alot of the exhaust parts (turbo, valves, manifold, exhaust, cat)... These days if you buy a good turbo like a Garrett, Trust or HKS they can withstand the anti-lag... But i wouldn't even dream of running anti-lag on the standard nissan ceramic turbo, it would blow it to pieces...

Well if your already running rotational idle you should already have a 10-15% opening so you wont need the kicker solenoid...

When the anti-lag is working the engine retards like 20-40degrees (on some cars) and dumps a heap of fuel into the exhaust manifold which then ignites on the hot manifold and more importantly on the turbine wheel which then produces boost... The car won't be ready to produce boost, it is producing boost...

Yes anti-lag is beneficial at the drags coz for the launch you want the turbo to be fully spooled for when you dump the clutch...

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

GTS-t VSPEC, so you are running a Wolf computer, can you tell me your experiences with it,

Its at the top of my list for ECUs right now. Looking at buying one in about 2-3 weeks. I havent read anything about them having rotational idle, or any other functions you mention.

Are the memory cards that easy to change over, what $$$ are extra cards worth.

Id like to have a Map setting to run say 12psi on road on 98 octane fuel, and the a track MAP setting to run 1.3bar on VP race fuel.

I ran MT8 on my old Skyline and was never happy with the quality of the tune you could get out of it. Not the most accurate fuel delivery and no matter how much tuning (by experienced tuner) you coudnt get it returning any decent economy figures as the thing didnt run closed loop. Sure did the job though when foot flat to the floor:D

  • 5 months later...
Originally posted by Dragon

Hmm, I was running rotitional idle and anti lag on my little GTti.

Rotational idle was used to spool up the turbo on a standing start. >12psi from the word go! (Then it would hit 26psi @ 5,500rpm)

Anti lag was used between gear changes to keep the rather large hybrid turbo spinning.

I would use the rotitional idle as a crude form of launch control. The MoTeC M4 Pro was set to cut the coil packs, but still allow fuel to pass through.

While staging, you would hit the launch control button on the steering wheel, engage 2nd (Never first gear) clutch in, and foot flat to the floor on the loud peddle.

The MoTeC would hold the revs around the 5,000 rpm mark, but keep on cutting the spark to the cylinders at random. While the throttle was wide open, the resulting pulsing from the engine would cause the turbo to spool while you are standing still.

As soon as the clutch engaged (A micro switch on the clutch peddle) the MoTeC would then switch off rotitional idle and run the proper maps. (IE: 9,500rpm cut, and anti lag turned on)

I used rotitional idle to gain boost while standing still.

Worked VERY well, but produced 6 foot flames out the back. (Cat died a long time ago)

Had a 5-8 second window of using rotational idle, over that, everything started to heat up badly.

Anti lag 'can' be used to get the turbo to spool up before launching, but is a very crude form of doing this, since you have to rev the engine right up, then lift off the loud peddle to get the antilag to kick in.

At least with rotitional idle, I had the throttle wide open all the time!

WOOOOO DUDE"S!.... I think I've seen this car. its being a few years but, there was this little blue GTti charade that used to blow the doors off V8's and WRX in the ACT... the driver was a nut bag :) .... Man you had to see this little machine fly

Its couldn't be the same car could it? your in Qld

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...