Jump to content
SAU Community

Recommended Posts

well.. hillclimbs are approx 1km - 1.5km in length and average 34-53 depending on car. only ones ive done is Highclere near burnie, domain in hobart, collinsvale in hobart and the basky one.

can find apps and schedules at www.nwcctas.net or www.cmitas.org.

browse youtube for vids on all :laugh: will link some vids tonight when i get home.

what one do you like best funz?

ive done legerwood lane and barigton ones as driver and passenger but i dont think i would go back to either for the expence of the travel and the value of driving time. but in saying that im hella keen to get my car to one

unfortunately they dont run the barington one any more due to a massively deteriorating road surface. its also got no grip at the best of times and at least one car gets totaled at every event

Minna Road was good too, its a quick one with good road surface and some exciting drops to steer away from!

Collinsvale is pretty fast... I pucked fourth in my old GTR there!

Domain is awesome if you have an Evo!

Dystart (and old one) used to be much like a flatter version of Minna Road.

Eagle Hawk Neck was the best and longest, maybe it will run again one day.

Update on my cars...

Evo III is all back together and heaps of fun to drive, although its still not yet been used in anger. Its for sale and is pretty much a fresh thing with plenty of cash throw at it in the near two years I've owned it. My dollar per kilomtre ownership ratio on this car is even worst than the GTR or the RX7... maybe the two combined! For anyone interested check it out - http://www.my105.com/12415

RX-7 hits the tilt-tray to go get the engine back in it today, fingers crossed I can get it ready to use at a circuit event next year. Pretty sure I have all the requireded parts now.

Already searching for the next toy in Japan, expect something very different from the previous!

http://www.youtube.com/funzr32

got 2 domain vids there, in process of uploading collinsvale, highclere and a few others. if you check my profile have a look at marinetowing, jam0076 in the gtr and snobes 350z. :-)

well.. front bar suffered a severe downsizing today at basky..not even jack could repair this lol

Oh well... At least you were out there having a crack.

Unlike that guy that turned up in his white GTR and then produced every excuse under the sun for not having a run... lol

Oh well... At least you were out there having a crack.

Unlike that guy that turned up in his white GTR and then produced every excuse under the sun for not having a run... lol

yeah, he was pretty slack aye! also that blaCK GTR complaining about 'oil' or something coming out of his car :-P excuses .

heres what the front bar looks like now.... lolz

photo-1.jpg

Well picked some more of my gauges up so thought I might throw them in and take a photo.

(plz note this is the first go at doing the cluster and yes it is clear perspex and Im planing on using it as a base for a better one)

1217091529-00.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...