Jump to content
SAU Community

Recommended Posts

Would have thought a gtr would be easier than something with the same power rwd

depends on the setup, im going to go with that around 400kw and up and a GTR will be harder to handle than a RWD in drags apps.

seen many a crashed gtr from new to gtr drivers that come from rwd platforms because of the way the torque split is

Edited by jangles

Trying to get a GTR with over 400kw out of the hole cleanly can be very difficult...

Alot of it is to do with the clutch. 400kw GTR needs a much bigger clutch with quite a sharp pick up as compared to a rwd, due to the available grip and weight...

With a manual rwd skyline, part of the launch IS wheelspin, the fastest way out of the hole is a perfect ballance of grip v's slip v's fwd movement- the wheelspin is directly controlled via throttle input.

Launching a GTR is the sweet spot between bogging on the line and flurry of awd wheelspin. A GTR will torque steer quite badly if the front wheels spin... fkn scary actually. The best way I can describe it, is feeding the car onto the torqueband.... easy to say, much harder to do.

My car has an OS giken r3c... basically an on/off clutch, thus trying to 'slip' of 'feed' with it is fkn hard enough, then throw in a violent launch/fwd movement and all your leg wants to do it fly back (off the clutch). The difference between a good and a bad launch is about 3mm.

Auto's... well it's the fastest and most consistant way to race almost any car. If I didn't want to drive my GTR on the street (and I'm a purist) I'd throw a AWD big auto under it and run faster and more consistant times.

It still aint easy though.

If you wan't to go fast on the drag strip.... big cubes/boost, auto, slicks, solid diff and a light car.

RWD- launch on th throttle

GTR- Launch on the clutch

Justin.

Received my pipes today,

slight mix up when posting so I got a set without a flange but the guy was a champ when i rang him & refunded me the price of itthumbsup.gif

hopefully I'll get a chance to dummy fit them tomorrow thumbsup.gif

20120110143050resize.jpg

Edited by Autumn33

Howdy,

Couple of questions. I've got an Nm35 Stagea

Where's the best place to get an immobilizer/alarm installed? Do most of you buy a kit off ebay and then get a place like Hobart Audio to install it? I recently imported the car and it's come with an alarm (and maybe an immobiliser) but my insurer quoted that I needed an 'Australian Standard immobiliser,' which has me worried if it got knocked off.

Also, where's the cheapest place to get a dump and catback installed? I rang up Moonah Mufflers and Carline and the latter seems the cheaper for an install.

Cheers

Edited by Drogba

I got mine done at Hoabrt Car Audio. (now Auto Addiction i think) on Murrary Street opposite Mitre 10.

$300 supplied and fitted

Edited by zoidbergmerc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...