Jump to content
SAU Community

Renault Clio Sport

Smurf

By Smurf,
in General Automotive Discussion

 Share

Recommended Posts

cefiro Experienced

cefiro

Posted
Posted

Yeh a mates got one, they go well and all the reviews, as you have read rave about them. punchy engine and you can throw the thing into corners as well.

go test drive one and I am sure you will be impressed, there should be a new one on the next year, but go and get in one. they could do with a bit more power but thats what you expect when you step out of a 300kw car.

writeoff Mentor

writeoff

Posted
Posted (edited)

I test drove one an loved it's instant torque, handling and standard equipment levels. The styling is less convincing. I like the front, I think the rear looks shite, and the interior doesn't have a 'special' feel to differenciate it from the garden variety Clios. But for $35k nothing (new) will touch it.

There is a website dedicated to french cars: aussiefrogs.com , and I know the Renault Sport Clio (RSC) drivers have their own site.

Edited by writeoff
scathing Grand Master

scathing

Posted
Posted

I'm assuming we're talking about the 4 pot and not the V6...

The ergonomics leave a lot to be desired. The steering wheel is angled like a bus, and the seating position exacerbates the feeling that you're driving a van.

The plastic cover over the instruments is at the perfect angle to catch the light and turn opaque. I found the throttle too touchy when commuting; it was hard to make minor speed adjustments. The "tallbody" style also catches crosswinds very easily, and doesn't have the weight to keep it steady.

I almost turned off the F3 and went back to the dealer because of how uncomfortable I felt, but as soon as I hit the Old Pac the thing just wrapped around me and read my mind like a psychic nymphomaniac gymnast.

They're an awesome car to drive. I got to test drive it up the Old Pac and, even after not driving for 2 years, I hopped in to it and was instantly fast.

The thing is just so chuckable, and the motor itself makes a fair amount of power (even without its lack of weight). The handling is good, but might be a little touchy for some. It'll oversteer at the drop of a hat, but with FWD you can just keep the boot in and pull yourself out of the corner.

Needless to say, once I reached Berowra and dropped back to normal speeds I got over those niggling ergonomic problems. It came real close to convincing me not to insist on RWD when I was looking for a car.

Its the kind of car that will shit you to tears Monday to Friday, but put a massive grin on your face on the weekend.

TokyoTaxi Veteran

TokyoTaxi

Posted
Posted

The only input I can offer is that one of the guys here at work has one ( 4 cyl 2003 model from memory ) and it's been in the shop under warranty 7 times. I don't know if there's any way to find out the frequency of warranty work carried out for a particular make / model of car, but it could be worth looking into to see if this is common or not. Hope that helpfull in some way.

Charly Grand Master

Charly

Posted
Posted
Lost my licence in a 182.  I love them.

lol, thought I might find you posting in here.

Yep, I'll also vouch for the goodness of the Clio sport. I gave squizz all sorts of crap when he told me about it and was forced to eat my words after a drive in it.

It's an awesome little car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
    • Kinkstaah
      Jacks that fit under GTR lips that can reach the subframe?

      By Kinkstaah · Posted

      Whoops!
×
×
  • Create New...