Jump to content
SAU Community

Recommended Posts

Dear Queensland Skyline Enthusiast,

As you know, our sport has been under attack from short sighted local Councils for years. Recently they've closed Lakeside Raceway and Darlington Park to racing and literally kicked our sport out into the streets. Then, they hypocritically complain about the mysterious increase in 'hooning' on public streets and refuse to take any responsibility when anyone mentions the rising road toll.

With the exception of the over-booked facilities at Ipswich, there are no dedicated circuits or drag-strips available for regular motorsport on either the south or northside of Brisbane, Sunshine Coast or Gold Coast. There are less facilities in Queensland now than there were 30 years ago. This situation is irresponsible considering a motoring population the size of south east Queensland. Meanwhile, motoring legislation has become more restrictive and revenue raising efforts increasingly efficient.

The lack of safe, professionally operated motorsport facilities in our state is not because the finances can't be found. Local councils control whether a property can be zoned for motorsport use and none of them are giving permission. They're all devoted followers of the NIMBY (Not-in-my-backyard) decision making system.

We are asking for separate space, away from residential communities, where we can be left to enjoy our sport in a safe and responsible manner. We don't want the politicians to pay for facilities, however, we do want them to stop blocking our efforts to do the right thing.

In closing, LMRE would like to thank everyone for the strong support so far and we will continue to work to provide a safe alternative to motor racing on public streets.

You can keep up to date with any future events and news by visiting www.lakesideraceway.com. Or, email us at [email protected] and we will include you on our Supporters List to receive media releases directly.

Scott Clark

Lakeside Motor Racing Enthusiasts

PS: Tell a friend!

Link to comment
https://www.sau.com.au/forums/topic/91895-motorsport-under-attack-in-qld/
Share on other sites

  • 2 weeks later...

Luckly WA doesnt have to worry about that (YET!) But im sure it will soon be on the bords for the time Being tho WA's pubs are being targeted and are being closed accross the metro for noise polution, So im sure the Barbagello raceway will be the next target soon.

Yes well written. I did hear a little rumour a while a go that an area of land around Kilcoy way had been successfully rezoned for motorsport use. . . . Can anyone else verify this. Would be great to see Lakeside back up and running for club style events and sprints though. . . . . And Darlington Park for that matter.

  • 4 weeks later...
Yes well written.  I did hear a little rumour a while a go that an area of land around Kilcoy way had been successfully rezoned for motorsport use. . . .  Can anyone else verify this.  Would be great to see Lakeside back up and running for club style events and sprints though. . . . .  And Darlington Park for that matter.

I understand that a complex at Kilcoy is being strongly considered but don't know who the players are, or what form of motorsport they intend to cater for. I'd also heard that they are trying to get a hillclimb event going there for 2006. That area could do with some development and support. Main industry is the meatworks and timber up in the hills.

Darlington Park - great venue, but sadly it's long gone. The family who built it are getting out of it after they guy whose dream it was died from heart failure. Urban encroachment is a poor reason to force these venues out of existence. I do have to say after having done a couple of ride days there that runoff areas were not adequate in a couple of key spots. Otherwise track layout etc were fantastic.

i put some extensive effort into geting a drag strip or a race track in on some old crown land in cairns only to have my ideas turned down by local council.

keep up the good work boys and girls this is an area where we could improve

I understand that a complex at Kilcoy is being strongly considered but don't know who the players are, or what form of motorsport they intend to cater for.  I'd also heard that they are trying to get a hillclimb event going there for 2006.  That

HRCC - Historic Racing Car Club are building the track at Kilcoy. Apparently work has begun on the site, and the track has been graded into the countryside, so its well advanced >_<

The Kilcoy Canter would be what you're referring to with the Hillclimb. It was to be run more as a rallysprint than a hillclimb, with two stages of approx 3km and 8km in the foothills and up the Jimna range, just outside Kilcoy. Cars would regroup between these two stages, and they would be run in both directions. Unfortunately plans for this have met with opposition from CAMS and the event has been shelved for another year. But it is still on the cards for the future.

I can back that up..the kilcoy track which is going ahead full steam behind the power from the HRCC..they expect it to be built late 06 hopefully..at least the basics anyway...track and some facilities.

Should be a really good track. The best of everything!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...