Jump to content
SAU Community

Recommended Posts

Ok after replacing the battery for the second time in the two years ive owned the line.....im just wondering if there is any places I can check or look for that would drain the batteries so quickly.

I do not have a sound system so no amp etc.....and I just got your basic alarm system with immobiliser and motion sensors.

Also what is the recommended voltage/size of battery for skylines ?

Finally last question is...can the batter voltage affect the car in any way ?

I think maybe im just being paranoid but the car doesnt seem to "start" as easily compared to the previous battery.

any help would be appreciated..

thanks guys..

Link to comment
https://www.sau.com.au/forums/topic/92067-battery-issues/
Share on other sites

hey thomas,

was the alarm installed when you bought the car??

i have a problem with my battery and the alarm is the cause...

goes dead in 2 days if the car isnt started

i got it tested at a normal auto electrician (my dads work)

found the prob in 10mins

Link to comment
https://www.sau.com.au/forums/topic/92067-battery-issues/#findComment-1659816
Share on other sites

I have the same problem

Standard Battery started wearing down quickly got down to only lasting 24hrs without the car being started. then bought a new big one which i left for 9 days when i flew home last hols and it went flat after 8 days..bit worried this new one will wear out quickly too.

I have a Viper alarm not sure if the really bright LED would drain the battery or not...its only an LED so i wouldnt expect it to be drawing much.

The alternator is fine and it charges to full capacity when im driving...i have an amp and sub which might not help...

any ideas how i can fix the prob?

I cant listen to the stereo without the battery draining and i noticed the driving lights such the power too....

Not sure if it is related but i get noise and interference through the speakers in tune with the revs (e.g. high pitch whine that gets higher as the revs increase) bloody annoying and only really noticable when the lights are on e.g. at night i have to listen to the stereo bloody loud or not on at all...

Would a capacitor help to smooth out the voltage into my amp? hence reduce the whine?

Sorry about the essay...having lots of probs with the car....

Link to comment
https://www.sau.com.au/forums/topic/92067-battery-issues/#findComment-1661721
Share on other sites

having a lot of problems on my GTT as well at the moment regarding the battery... it could be alternator, but car has only done 40000 kms so i doubt it. Grounded the wire from battry to chasis/coilover bolt. Still problems, the battery simply does not charge and if i dont tstart the car up the first time, it will not start up afterwards

Link to comment
https://www.sau.com.au/forums/topic/92067-battery-issues/#findComment-1662058
Share on other sites

The alarm drains a surprising large amount of power.. it's not the LED - it's the constant signal it's emitting to all the sensors, sonic detectors.. everything that it's monitoring..

Moving past that though - Most batteries will die after a couple of weeks without the car being started, it might just lose to much charge to crank over the engine. Also it's not about the voltage so much as cranking amps is what is required to get the engine kicking over..

Link to comment
https://www.sau.com.au/forums/topic/92067-battery-issues/#findComment-1662859
Share on other sites

Cheers mate

Pretty sure its not the boot light though, u can see the light through the little vents in the rear parcel shelf when its on and i dont see that when the boot is closed.

I have to leave my car for a couple of weeks when i go on hols to qld, i dunno how to stop the battery from draining and setting the alarm off, the gf's neighbours were pretty pissed last time i went away and the alarm went off...

Link to comment
https://www.sau.com.au/forums/topic/92067-battery-issues/#findComment-1663969
Share on other sites

  Trooper said:
Cheers mate

Pretty sure its not the boot light though, u can see the light through the little vents in the rear parcel shelf when its on and i dont see that when the boot is closed.

I have to leave my car for a couple of weeks when i go on hols to qld, i dunno how to stop the battery from draining and setting the alarm off, the gf's neighbours were pretty pissed last time i went away and the alarm went off...

Weird that you all say that... Im still using a fairly small battery in my car. Running 2 amps, and a flashpoint alarm. The alarm has 3 immobilisers plus the little key thing in the dash where u can turn it on and off without using the remote. I'd say that uses a bit more power than ur standard alarms. Also have my gauges hooked up, not sure if they use power to keep memory settings etc.

I've had my battery for over a year and never had any probs. I went away to NZ for 11 days, came back and cranked over no sweat. In theory the amp shouldnt use any real power till your deck sends it the signal. Maybe i got a magic battery?

In regards to the interference as the revs go up, its to do with your earthing. Check your earthing on your car, maybe move it to a different spot and you'll be sweet. The series 2 r33 has a nice little bit of metal down behind the ash tray behind where ur deck would sit with a hole through it . Perfect for earthing with a screw and a nut...

Link to comment
https://www.sau.com.au/forums/topic/92067-battery-issues/#findComment-1664087
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah - but you won't find anything on dismantling the seats in any such thing anyway.
    • Could be. Could also be that they sit around broken more. To be fair, you almost never see one driving around. I see more R chassis GTRs than the Renault ones.
    • Yeah. Nah. This is why I said My bold for my double emphasis. We're not talking about cars tuned to the edge of det here. We're talking about normal cars. Flame propagation speed and the amount of energy required to ignite the fuel are not significant factors when running at 1500-4000 rpm, and medium to light loads, like nearly every car on the road (except twin cab utes which are driven at 6k and 100% load all the time). There is no shortage of ignition energy available in any petrol engine. If there was, we'd all be in deep shit. The calorific value, on a volume basis, is significantly different, between 98 and 91, and that turns up immediately in consumption numbers. You can see the signal easily if you control for the other variables well enough, and/or collect enough stats. As to not seeing any benefit - we had a couple of EF and EL Falcons in the company fleet back in the late 90s and early 2000s. The EEC IV ECU in those things was particularly good at adding in timing as soon as knock headroom improved, which typically came from putting in some 95 or 98. The responsiveness and power improved noticeably, and the fuel consumption dropped considerably, just from going to 95. Less delta from there to 98 - almost not noticeable, compared to the big differences seen between 91 and 95. Way back in the day, when supermarkets first started selling fuel from their own stations, I did thousands of km in FNQ in a small Toyota. I can't remember if it was a Starlet or an early Yaris. Anyway - the supermarket servos were bringing in cheap fuel from Indonesia, and the other servos were still using locally refined gear. The fuel consumption was typically at least 5%, often as much as 8% worse on the Indo shit, presumably because they had a lot more oxygenated component in the brew, and were probably barely meeting the octane spec. Around the same time or maybe a bit later (like 25 years ago), I could tell the difference between Shell 98 and BP 98, and typically preferred to only use Shell then because the Skyline ran so much better on it. Years later I found the realtionship between them had swapped, as a consequence of yet more refinery closures. So I've only used BP 98 since. Although, I must say that I could not fault the odd tank of United 98 that I've run. It's probably the same stuff. It is also very important to remember that these findings are often dependent on region. With most of the refineries in Oz now dead, there's less variability in local stuff, and he majority of our fuels are not even refined here any more anyway. It probably depends more on which SE Asian refinery is currently cheapest to operate.
    • You don't have an R34 service manual for the body do you? Have found plenty for the engine and drivetrain but nothing else
    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
×
×
  • Create New...