Jump to content
SAU Community

Recommended Posts

hey guys, is there any problems with importing gtr 33's over here? i know they need to be complied stock but what about the mods on them? im looking at one with suspension, exhaust, wheels, air filters, what happens when they get complied will i still get to keep them?

this one has 76000kms on it, do u think its been wound back?

is it ricky buying one importyed? any things to look out for? who should i get em from? the one i like is from j spec anything wrong with em?

also did r33 gtr's ever come with dual airbags?

thanks

Link to comment
https://www.sau.com.au/forums/topic/92143-some-gtr33-questions-and-importing/
Share on other sites

hey guys, is there any problems with importing gtr 33's over here? i know they need to be complied stock but what about the mods on them? im looking at one with suspension, exhaust, wheels, air filters, what happens when they get complied will i still get to keep them?

this one has 76000kms on it, do u think its been wound back?

is it ricky buying one importyed? any things to look out for? who should i get em from? the one i like is from j spec anything wrong with em?

also did r33 gtr's ever come with dual airbags?

thanks

Basic answers are...

Problems...no more than importing any other car

Mods...generally not a problem but need to be removed for compliance, you will get to keep them

KMs...without seeing the car, you won't be able to tell, but there are plenty getting around with that number of genuine kms.

Who to get them from...there are at least half a dozen people on here who will help you import a car, me being one of them. I haven't dealt directly with J-Spec so can't comment, but I know they are legit with their prices.

Dual airbags....yes they did.

There are thousands of R33 GTR's already here, in good condition and cheap as chips. You would be silly not to consider one you can test drive and look at before going ahead and importing one.

You wont save much money importing an R33 anymore.

hey guys, is there any problems with importing gtr 33's over here? i know they need to be complied stock but what about the mods on them? im looking at one with suspension, exhaust, wheels, air filters, what happens when they get complied will i still get to keep them?

this one has 76000kms on it, do u think its been wound back?

is it ricky buying one importyed? any things to look out for? who should i get em from? the one i like is from j spec anything wrong with em?

also did r33 gtr's ever come with dual airbags?

thanks

I was under the impression you had to show receipts of any mods being destroyed?

76,000kms on the clock - seems a little low for a 9-10 year old car doesn't it? how many 1995 cars here do you see with 76,000kms on them? Not many, no different to overseas. Most jap imports are wound back, but if you want to belive your car is different, no one can stop you :P

Yep Series 2 and Series 3 GTRs came with Dual airbags(1996+)

thanks for the tips guys, well my max budget is 35k, the ones around here from dealers seem to be 40-50k mark, the ones within my budget are not so good, the ones from brokers seems to be better value for money, they are under the 35 k mark and are good examples.

am i looking for ones offered here at the wrong places? can anyone recomend me one?

Thats probably because the ones from japan say they are good but are probably 'not so good' as you put it but since you won't see it before you buy it will be to late :D

its all risk... are you a gambler? :P

im a gambler by blood, im from hong kong hahaha, but since ive grown up here, i havent got a gambling bone in my body.

i guess a car is something you shouldnt be gambling with, even more the case when i plan on keeping this car for 3-5 years.

can you guys reocmend me trustworth places to purchase from the floor?

I would buy privately, always going to get a better deal. Private sellers won't have the resources to rip you off/con you. Ie cover up faults with the car. And you can tell if someones enthusiastic about thier car and if they have cared for it usually. Most people on this forum fit that description.

Also make sure you can afford to fix something if it does go wrong. :D

I was under the impression you had to show receipts of any mods being destroyed?

76,000kms on the clock - seems a little low for a 9-10 year old car doesn't it? how many 1995 cars here do you see with 76,000kms on them? Not many, no different to overseas. Most jap imports are wound back, but if you want to belive your car is different, no one can stop you :)

Yep Series 2 and Series 3 GTRs came with Dual airbags(1996+)

The car must be stock for compliance, that's all I'm saying.

As for kms, it is plenty different here to overseas. There are still plenty of good low km cars getting around over there. But what would I know - I only used to actually work at the auctions in Japan...

Like anywhere, you get what you pay for - a $30K GT-R with 76,000km is probably going to be wound back, a $35K one probably isn't.

I'd be interested to know how many of these people offering advice have actually imported through brokers before, or whether they're basing their information on what they read in here, which usually only gives one side of the story...

I'd be interested to know how many of these people offering advice have actually imported through brokers before, or whether they're basing their information on what they read in here, which usually only gives one side of the story...

I imported my R34 GTR through a broker and am advising him from the experience I had as well as the general market in Australia at the moment. It's very difficult right now to sell an R33 GTR privately for a top price - its a buyers market as they say. Therefore buying an R33 GTR locally would be worth a look at least.

I'd be interested to know how many of these people offering advice have actually imported through brokers before, or whether they're basing their information on what they read in here, which usually only gives one side of the story...

I think that statement is almost as naive as what your implying..

After seeing the quality of the car Sewid imported i'd be leaning towards listening to the advice he's offering rather than assuming..

Anyways..

My main reasoning behind getting a car that is in Australia is that you get a chance to see it, touch it, drive it and generally get a better overall image of the car that you could be purchasing..

I'd definately check around here before importing - you may even find a better condition car for the same price that someone is trying to get rid of..

Edited by Links

Links - why is that statement naive?? Are you suggesting sewid's car is really good or that he got ripped off??

Anyone can post on a forum - maybe I should start a thread on how many customers have ripped me off. I have one in particular who, a few years ago, stung me for over $10,000 because he refused to pay for the car, and because he had the import approval, refused to let the car be released off the wharf, meaning I had to ship it back to Japan. In the end, it's only one side of the story.

Of course he can find a car in Australia, but there are plenty of people who look at, and even drive cars here, that end up getting ripped off too. Buying locally is a preferred option, but it's not the only one. If he can't find what he's after, there's no reason not to import one if he uses a good broker.

Edited by vrfour
  • 3 weeks later...

or may be a trip to jap and source there?

since your form hk, then you should have friend(s) can speak jap, or from jap, or ask someone ...

we should organised a group buy....NOT intercooler or bodykit,

BUT a trip to those jap auctions that we can only dream about it!!!!

plus a holiady in osaka isnt a bad idea, may be some Tofu delievery on some downhill passes..

  • 4 weeks later...
this one has 76000kms on it, do u think its been wound back?

Pre export odometer certification is available in Japan for a cost of about 5,000 yen. Basically the whole cluster is removed and dismantled down to the head. Date stamps are also checked to make sure they match up and the cluster hasnt been swapped, or an aftermarket one has been installed, which is often the case with Nismo 320km clusters and GT-Rs.

I imported my R33 GTR. Like most things a TRUE bargain is hard to come by. I believe you have a better chance of picking up a good car at a good price locally, when I was looking there wasn't much to look at locally at all. Now there seems to be very good cars coming up almost weekly at very good prices. When I was looking I had much better choice in Japan. Just remember if your workshop does the right thing you won't get any of your mods back it will be returned to stock. Mine was one of the 1st to go through the RAWS deal so mine was definately done by the book, completely stock, and I paid a premium price. Having said that I have yet to see a cleaner example, with nothing missing and everything as is should be. . . I am a happy GTR owner and after nearly 2yrs of ownership and 30000kms still happy :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...