Jump to content
SAU Community

Recommended Posts

Hey

Ive run into some trouble.. (1993 R33 GTS-T, NO engine mods)

Last night i was cruising around and all of a sudden it felt as if the engine 'grabbed', similar felling to pressing the brakes, there was no response from the accellerator so i backed off to around 60km and tried to accelerate again but nothing but a steady crawl... i realised there was no boost at all, no blow off valve noise, nothing!

I also noticed a horrid burning smell whenever i revved over 2500rpm, so i basically had to roll all the way home. I also noticed this morning that it is blowing white smoke out the back like a bitch, and still no boost.

I took it to the mechanix and left it with him, he rings me up and tells me the exhaust impeller wheel has desintegrated and parts of it have collected near the cat, so basically its rat-sh!t...

Now, i live in a area thats far removed from anything resembling an import wrecking yard (Outback NSW, near places like Orange, Dubbo, Bathurst) and need help finding a replacement turbo.

I have looked at buying a T3/T4, but would require a different wastegate, dump pipe, maifold etc so i have decided to try and locate a stock R33 turbo second hand (But in good nick) from somewhere, i just need help finding that somewhere...

Any help is greatly appreciated...

EDIT: Sorry... new

EDIT - R31Nismoid - legal reasons, no-one likes a bragger, illegal street activvities are not cool

Edited by ch0pstA~
Link to comment
https://www.sau.com.au/forums/topic/92250-blown-skyline-turbo/
Share on other sites

bear in mind if you get a 2nd hand one it could do the same thing yours did within 6 months. HKS 2530 can be had for about 1200-1500 second hand. You only have to have water lines and oil lines modified slightly. You could sell your blow turbo to someone for probably 100 bucks which will cover the water lines and oil lines.

Otherwise get yours rebuilt. I wouldn't spend much more than 300 for a 2nd hand stocker due to the condition being a bit unknown

thats a bit steep. dont pay any more than $400 for one. there don't seem to be any for sale in the forums at the moment but try these 3 places.

http://www.option1garage.com.au

http://www.importbitz.com/turbo.htm

http://www.justjap.com/

Sorry i couldnt help more.

Dont pay that much!! Wait for one on the forums if you can. About $400 max would be the no.

Otherwise get a highflow for $2k..maybe ring up a turbo rebuilder..if you want just the same as stock but with a steel wheel on the exhaust you amy be able to get it a bit cheaper..

bear in mind if you get a 2nd hand one it could do the same thing yours did within 6 months.  HKS 2530 can be had for about  1200-1500 second hand. 

And how can you prove or say that the same thing wont happen to the 2nd hand HKS one aswell?

Just because it has a brand name does not mean that it didnt get a flogging, high km's and poor owner care which all lead to it blowing

I guess that's true about 2nd hand HKS - but atleast you don't stand the same chance of the wheel flying off. Shaft play can help give an indication

If 2nd hand HKS it would be nice to see a receipt or something - agreed if you spend that much on something 2nd hand it is a little iffy.

Well its my daily driver so i need it back on the road ASAP, i guess i may just have to go for the $650 one....

BTW, heres a photo of the culprit, all its done is cost me money since i got it... im considering looking around for a late R33 model with engine mods already done... we'll see... btw colour is Black with midnight purple pearl, beautiful in the sunlight...

post-24256-1130214725.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...