Jump to content
SAU Community

Recommended Posts

Heres my Lozza

Some new Pics at bottom of Page

C33 Nissan Laurel

Inspection Front Bar

Wonder Side Skirts & Rear Bar

Flared and Rolled Guards

Deep Dish Wheels (16" Front - 17" Rear)

Xenon HID Head Lights - Very Bright Artic Blue

RB25det Engine Conversion

5 Speed Manual RB25det Gearbox

Trust TD06 Turbocharger

GTR Frount Mount Intercooler

HKS Air POD

Oil Catch Can

Aftermarket Dump Pipe

Full 3" Mandrel Bent Exhaust w/ Cannon

GTR Fuel Pump

Greddy Type R BOV

Remapped ECU

Turbo Timer

Pivot Air Flow Converter

Triple Layer Radiator

Twin Thermo Fans

Twin Plate Clutch

Nismo 2 Way LSD

Short Shifter

Kei Office Coilovers (Everything Adjustable)

Rear Adjustable Camber Links

Cusco Front and Rear Strut Bars

Cusco Front and Rear Swaybars

5 Stud Conversion All Round

GTR Brakes

Slotted Rotors

8 Point Roll Cage

Boost, Water Temp, Oil Temp & Oil Pressure Gauges

Nardi Personal Steering Wheel

R32 Seats

Raised Bonnet

Zip Ties in Front Bar

Power

Made 300rwhp @ 1.1 Bar

Pictures

power_47.jpg

44_743.jpg

Edited by j_insoll
Link to comment
https://www.sau.com.au/forums/topic/92608-nissan-laurel-rb25det/
Share on other sites

konect - Yes the car is RWC and Registered, driven probably 2 or 3 Times a week.

jimbeam - I did not fit the TD06, a Japanese Guy did..........

Sky80 - Lier - I fitted an Oil Catch Can, Bride Seat, and put zip ties in the front bar. :lol:

But yes all the work was done in Japan

very nice... it must be much more relaxing to drift in a Laurel than a cramped up Silvia :D

I've got a TD06 waiting to go onto a RB25DET, so I'm very keen on finding out what engine mods and management you've got to support the beast.

very nice... it must be much more relaxing to drift in a Laurel than a cramped up Silvia :rolleyes:

I've got a TD06 waiting to go onto a RB25DET, so I'm very keen on finding out what engine mods and management you've got to support the beast.

To the Monkey that just so happens to be Funky........... :huh:

Mods are as per posted in the List at the top. Apparently the car has a 'Chipped' ECU, although we have taken a look and dont think it has been touched, though we could be wrong. The Injectors are also Standard RB25det Item. You most likely have the Trust TD06-20g. Mine I 'believe' is the Trust TD06-17c. As far as I know the 20g uses The Single Blade type wheel and the 17c uses the Double Blade type wheel (The 20g is the newer version obviously). I hope im making sense. Im currently running 1 Bar (14.7psi) and It makes full boost at around 4500rpm. Obviously this is a bit Laggy, although I have a feeling the Actuator/Wastegate may be a little bit loose, causing a bit of unwanted Lag. I have had this problem in the past.

With a RB25det, Upgraded Fuel Pump, 550cc Injectors, POD, Frount Mount, Exhaust and a Power FC, you should be able to put out approx. 340rwhp @ 1.3 bar. That would be my guess from what ive experienced with my car. Id guess it to spool up around 4000rpm. But hey I could be wrong!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...