Jump to content
SAU Community

Recommended Posts

Here's the calendar link http://www.vhrr.com/calendar.htm#start

Big Pete reckons it's very cool and the ex-Gibson cars will be there so I'm thinking of making an effort on one day to go take a look.

Just thought I'd offer a heads up for racing enthusiasts that have missed this.

Cheers

Geoff

Link to comment
https://www.sau.com.au/forums/topic/92732-sandown-historics-nov-4-6/
Share on other sites

Here's the calendar link  http://www.vhrr.com/calendar.htm#start

Big Pete reckons it's very cool and the ex-Gibson cars will be there so I'm thinking of making an effort on one day to go take a look.

Just thought I'd offer a heads up for racing enthusiasts that have missed this.

Cheers

Geoff

Jeff, i'll give you two tickets for both Sat and Sun. There will be some Ex-Formula One car there as well and a famous guy ( Sir something ) also gonna be there.

Porkas????.....PFFFffft!! 944 isn't a real car. I think the GTSt was quicker at the island :D

I've been pestering Issy at Selectmaz to let me buy his S2 RX7 that was never beaten in Improved Production class. The prick has decided to campaign it next year so I mught just have to build one with his help.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
×
×
  • Create New...