Jump to content
SAU Community

Recommended Posts

Hi guys we are looking at selling all of our equipment on the exhaust side of the engine.

1.full stainless manifolds

2.stainless dump pipes.

3.HKS GT-SS turbo's

4.Twin 3'' into 4'' front pipe.

5.complete custom intercooler piping to the intercooler.

6. will also pay to have the custom plumb back bov installed like we have.

The intercooler piping cost us $1500 alone.

This Kit has been proven to make 360AWKW!!

The car has only done about 12,000 kms with this set up all was purchased new.

The reason for selling is that we are looking into putting a very large single on the car.

We are going to sell the lot for $6200.

This combo would be one of the best street set-ups i've been in almost no lag and pulls to 8500rpm.

Cheers.

My dad ran an 11.7 with slow gear changes .he's 60.

with a good condition gear box,ours is pretty dead. it will run 10's no worries.

as for splitting it up we would only trade for a big single kit.

T51BB or T88 or T04Z full kits.

My dad ran an 11.7 with slow gear changes .he's 60.

with a good condition gear box,ours is pretty dead. it will run 10's no worries.

as for splitting it up we would only trade for a big single kit.

T51BB or T88 or T04Z full kits.

What terminal speed did it clock?

My dad ran an 11.7 with slow gear changes .he's 60.

with a good condition gear box,ours is pretty dead. it will run 10's no worries.

as for splitting it up we would only trade for a big single kit.

T51BB or T88 or T04Z full kits.

Well if you change your mind let me know as im interested in the turbos. You might have a hard time finding someone who has 6200 to spend all at once but the parts you list are all pretty quick and easy to find homes for individually.

The best part about the kit is the way the whole lot works together. there is almost no lag and its made 367at all four.

anyone who has been in the car will agree this would be one of the better all round GTR's with its amount of torque and power that it produces at such low boost. if i start selling everything separate that won't be getting the same power and response so they may be thinking they are getting dudded in the deal.

We are looking at putting on a T51 KAI BB if anyone knows how has they want to sell or swap.

Cheers

Well if you change your mind let me know as im interested in the turbos. You might have a hard time finding someone who has 6200 to spend all at once but the parts you list are all pretty quick and easy to find homes for individually.

Me too :)

depending what manifolds they are i'd be keen, dont need the turbo/dumps

Mine arrived the other week. Just dont have manifolds other than stockers i might get ext honed

The manifolds and dumps are from SUB-Zero in Queensland.

I don't really want to separate them so if one of you wants the turbos and the other wants the manifolds you might be able to work something out between yourselves.

I'll sell the whole lot together for $5500 and you can split the lot up if you want.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...