Jump to content
SAU Community

Recommended Posts

Hey guys, just wondering if i should do this, as someones putting an rb20det gearbox in an r32 gtr.

The main advantage here to me is price, a 20det over here can cost near nothing, whereas the rb25 can cost up to $$2500!

Im converting my r33 gts25t auto to manual, and would like to know what you all think of this as an option????

Also, what other things should be upgraded at the same time when the conversion takes place???, is heavy duty clutch the way to go?if yes which type should i go for?

thanks

Link to comment
https://www.sau.com.au/forums/topic/93066-rb20box-in-25det/
Share on other sites

If you put an rb20 box behind an rb25....

You will blow that box earlier... On a standard motor you would not have a problem.... But if you wish to push a few extra kw's you will destroy the rb20 box....

My old r31 rb20 went thro 3 rb20 boxes in 12 months (241rwkw).... Got an rb25 box and never had a problem

Link to comment
https://www.sau.com.au/forums/topic/93066-rb20box-in-25det/#findComment-1679258
Share on other sites

A heavy duty clutch will just help you destroy the box more quickly.

Agreed. My RB20 180 blew 3 gearboxes in 3 months after a got upgraded the clutch.

Sure you save money getting the 20 box, but the hastle of them blowing its not worth it. Nothing worse than sitting on the side of the road waiting for a tow truck and being off the road. Doesnt take long to wear thin

Link to comment
https://www.sau.com.au/forums/topic/93066-rb20box-in-25det/#findComment-1680734
Share on other sites

I don't know how redily available Z32 parts are over there, but the NA clutch and pressure plate mate right up to the rb25 box.

And if you ever manage to blow up the rb25 box (which won't happen), it has the same internals as the TT Z32 box.

Link to comment
https://www.sau.com.au/forums/topic/93066-rb20box-in-25det/#findComment-1683108
Share on other sites

And if you ever manage to blow up the rb25 box (which won't happen), it has the same internals as the TT Z32 box.

Do you know this for certain? Have you done a rebuild using the 300zx internals?

My 25det box needs new bearings, and CBC dont list any parts for the rb25....

I need part numbers for a bearing kit in the rb25det box....

Link to comment
https://www.sau.com.au/forums/topic/93066-rb20box-in-25det/#findComment-1692763
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Spotted in NYC! Fresh off the boat too it seems!
    • he bridged the 2 pipes together in 2 spots. Making a H pipe. i'll get a photo and post it tomorrow 
    • The spray cans were in the "Kiln" room whilst I was preping the parts,  so probably around 2 hours to get them warmed up, the kiln room has 3 small ovens running at 100°c, 3 medium sized ovens running 100°c, and the large one I used running at 80°c, the room itself was about 28°c, I also spent a bit of time taping up the parts in the room as well, and by the time I was done I would assume that the parts were around that 28°c As for power, I expect a couple of Killerwasps up high would be achievable with the current mods, I'm still running the MZR 2.0 intake and throttle body, and there is a slight mismatch with the 2.0 intake (smaller) and 2.5 intake ports (larger) on the head, this intake is matched and specifically designed to fix this issue with the ports mismatch, the throttle body is also a couple of mm larger, OEM is 65mm, the Bosch is 68mm In the end it will look "prettier" than the molded plastic thing that is the OEM MZR 2.0 intake As for the LSD, it's the OEM Torsen which works fine for what I use the car for, plus, basically no maintenance apart from the occasional oil change
    • I was at Tunehouse in Marrickville (great team over there really know their VR's) , and I spotted this Very clean R35.  
×
×
  • Create New...