Jump to content
SAU Community

Recommended Posts

hahahaha might have to... apparently the gold one makes a bbit of a whistle, bought a cheap trust type s copy today

put it on and sounds like my ssq nothing like the type s. maybe the spring it to tight or not tight enough, its not one solid woshhhhhhh, i dono will play around tomoro, or maybe its cos its a cheapy and its just crap hahhaha

Hi, I had the standard silver insert and bought a purple one from Xspeed. They used to have all of the SSQV accessories, so check out their website. My understanding was that the gold insert made no difference in sound, it was just a different colour. The purple insert is a lower pitch sound, which is less penetrating (i.e. carries less).

I recently bought a plumb back connection for the SSQV from bd4s.com.au. So now I don't go "PHUTOOOO", I go more like "phoooo".:)

Hope this helps.

Cheers.

P.S. Aren't phonic representations of BOV sounds crazy! If you had a conversation about it in public, you would be locked up! :D

hey guys i'm planning to get a HKS SSQV BOV and everything on my car is stock just changed the airfliter only, my friends told me the car will stall alot is it true?? do i really need to get a better ECU for it to work??

ps. its a R33 Serious II

a atmo. bov on a stock car can cause it to stall a bit, as the ecu thinks the air is going back into the intake, and sends in enough fuel to compensate for it, except the air isnt going into the intake, but rather out into the atmosphere. so it has less air, and over fueledl, and can stall.

R33 Serious II eh? ive got a R33 Series I :)

I've got a serious 1. :P

Apparently the stall issue is also how u tune the blow off (from what i heard, how true it is, i don't know), the pressure spring tightness. But by right, it shouldn't. Most.. or almost all cars after installing it dosn't have any probs. But of course, murphy's theory stands.

hey guys i'm planning to get a HKS SSQV BOV and everything on my car is stock just changed the airfliter only, my friends told me the car will stall alot is it true?? do i really need to get a better ECU for it to work??

ps. its a R33 Serious II

Hi again. An atmo BOV should not make any significant difference to the likelihood of your car to stall. Mitchy's comment is true to a point, the engine will run momentarily rich for a second or so when the BOV has acted. But this won't cause it to stall - 'coz your BOV is only acting at 1800-ish revs and above.

There is a looong thread on low revs stalling, in the Forced Induction forum, which concluded that repeated stalling at low revs comes from the Oxygen sensor being stuffed. There is loads of info on replacing it, including getting the same part from a Ford dealer, but loads cheaper.

So you can just stick your BOV on the car and it should work fine.

Cheers. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • +1. Good thing is people wont tailgate you for a while
    • If you have a RB25DET NEO AWD motor, you will need this: https://www.hioctanedirect.com/ASR-RB26-RWD-Street-Comp-6.5L-Sump-Suit-R32/33/34-and-VL It is made for the AWD motor, but makes it fit a RWD setup and gives you a new pickup. Just one thing, the pickup sits quite forward, compared to a conventional RB25DET RWD motor. This may or may not have contributed to my previous AWD -> RWD shitting the bed at the track.
    • My car is also flex tuned. It's worth mentioning it (the LS1 ECU) has a 1D table for E85 addition and just uses the ethanol stoich part as the second point of reference. It also as a 3D timing map for Ethanol adjustment. You would think this isn't enough but it works pretty damn well. That said, I wouldn't want it in turbo application. It's like lifting non-natty, or taking meth. It gets you unrealistic results that break down more things going forward. If people used it to make the same amount of power they do on 98 then it'd be one thing. But people use it, crank it up to eleventy million PSI, it doesn't knock - but it pushes the point of failure to another, more expensive thing to break. Every time I see someone make 280kw on 98 and 350kw on E85 on the same equipment I just cry a bit and really wish they would just stay on 98 in that exact scenario. It's bad for you. 
    • This is kind of what I was thinking but the temp sender wire and the two pressure switch wires run through the starter subharnes and I eliminated the two pressure switch wires completely.  @GTSBoy I have a can gauge with unusually bright warnings should the oil pressure fall so the factory light isn't needed. I need to dig out my wiring diagram and see if I can sort this out.
    • It's a valid point. And it is doable with the Nistune. But I'm not inclined to flex it the way Nistune does - certainly not on a Neo ECU. They're already pernickety enough to tune just one one fuel. And of course, I'm not that interested in putting in a Link or similar, on a daily. With the stock ECU, stock looking turbo, etc etc, I still stand a chance of surviving a run-in with the plod. Last time it went over the pits (which was for the transplant, for because of a run-in with the plod), the Nistuned ECU did not even raise an eyebrow. They want to see a stock ECU running the engine, and they are happy to see it do so without the check engine light** on. Never mind that the Nistune is necessary to make the stock ECU work in a different chassis without ABS, TCS, etc. **And they actually provoke the CEL to come on by disconnecting the AFM, to prove that the globe hasn't been pulled!
×
×
  • Create New...