Jump to content
SAU Community

Recommended Posts

Hey guys,

As the topic states my Driver's side window is loose...when the door is shut and the window fully up it is alright but as soon as the window comes down a few inches the window rattles as the car goes through a crack/hole in the road.

Or if the window is fully down and I go to put it back up it sorta rattles itself to a start..its nothing too bad but I have been told that alot of skylines encounter this problem.

So if anyone has this problem and has a solution, any ideas would be much appreciated.

Thanks,

-Dave.

Link to comment
https://www.sau.com.au/forums/topic/93648-drivers-side-window-loose/
Share on other sites

i'll try and get onto it this week...let you's know how I went.

I had the windows tinted recently by a guy I knew, I told him to have a look around for anything which could be loose but he didnt find anything. BUT i will have a look at it asap and get back to ya's.

CheerS!

  • 2 months later...
  • 4 years later...

In regards to those two bolts, just be careful how much extra tension you put on them.

I did mine a few months back and it ended up being a little too too tight and split, and popped the roller ball out of the mechanism.

New regulator is the only fix for this :wub:

Do it a little at a time and keep checking before you put the trims back in place!

Hey guyz i tried tightenin it and the top part of the window is tight but when the window is fully down, the bottom of the window shakes.

It looks like the window has a guide inside the door and when its fully down the window has a lot of space between the guide to move about and shakes alot and its pissin me off.

anyone have a solution?

  • 10 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...