Jump to content
SAU Community

Recommended Posts

I currently have a black widow alarm, Dont know the model as yet.

I am interested in getting a turbotimer/remote start system for the car.

But from what i have read, the ones im looking at, for the price, dont have immoblisers. I am wondering, am i able to have the remote start alarm, connected to my alarm, so i am able to use the immobliser?

Also, i am wondering what the quality of the items below. They have some awsome features, but one guy on here "abo bob" said he wouldnt bother with them because they have everything BUT an immobiliser. Which is the one important factor of any car alarm, if you ask me and/or anyone else with a skyline/car over $15k. LOL

here is the linkies. Give me your thoughts, Even better, if you own one, tell how well it does it job/how badly it does it/if it does it at all LOL.

The main one i wanted was the PAGEGUARD PG-8000S. For what i have come to understand the PYLE brand of audio is like worse than BOSS. So im more inclinded to stear clear of it, just give me your thoughts.

- PAGEGUARD PG8000S

- PAGEGUARD PG6000S

- Pyle PWD501

- FM 2 WAY 1.5KM (this one doesnt even have a brand name.)

CARSCOP (another no name)

- Last but not least - Viper 791XV

Give me your thoughts peoples.

pageguard 8000- done this one. VERY easily bypassed. (look at the wiring image - see the EXTERNAL relay.)

Pageguard 6000 - see above. very similar to the jaycar item actually.

Pyle- two module unit - sold under many brands hidden well enough it does ok. only one point and the relay is external but inthgrated into the main harness.

done this one on a WGC34

791 XV - done these on 32,33,34 skylines. biggest problem is the relay satellite. only drops the starter and extra points are possible but easily bypassed as they are external.

as for putting both together - nope.

if you are dead set on remote start look for remote start modules and not alarms. you still have the same problem and the insurance companies may not like you afterwards

( you have just cars for insurance?)

Edited by Chris Rogers

gktech aka EXAUNV sells those vipers on here...and as far as i know they have 2 points of immobilisation standard....

might have to sacrifice the wank factor of remote start for a better alarm. thats what I did...also came out in front, by getting aus standard....insurance friendly

chris rogers is your man for mongoose systems...great price

I just want a 2 way alarm more than anything else. The remote start doesnt get me all that much.

The reason i was thinking of getting the pageguard PG8000S is because of i dont have a turbo timer and i am going to get one soon, so i figured, instead of spending $130 - $230 on a turbo timer, why dont i just spend $300 on the page guard which has a turbo timer as well as a two way remote. I really like the idea of having a two way remote. As well as the pageguard 8000s and the 8500S (which is the model which takes pictures of within the car) having a really nice/sifisticated looking remote.

Could you also explain, all the point of immobilisation.

I herd there is like 6 points. Can you tell me what they are from one to six.

- pageguard 8000- done this one. VERY easily bypassed. (look at the wiring image - see the EXTERNAL relay.)

- the relay is external but inthgrated into the main harness.

- biggest problem is the relay satellite. only drops the starter and extra points are possible but easily bypassed as they are external.

Sorry, im a little n00b to auto electronics.

I dont really understand what you mean by they are easily bypassed and what the external relay is/does.

Could you also clairfy these things for me.

gktech aka EXAUNV sells those vipers on here...and as far as i know they have 2 points of immobilisation standard....

might have to sacrifice the wank factor of remote start for a better alarm. thats what I did...also came out in front, by getting aus standard....insurance friendly

chris rogers is your man for mongoose systems...great price

he was selling them. DEI australia had a polite chat with him over it as I understand.

the ones he was selling were SINGLE point (I did a fair few of these into 33 & 34 skylines.)

I just want a 2 way alarm more than anything else. The remote start doesnt get me all that much.

The reason i was thinking of getting the pageguard PG8000S is because of i dont have a turbo timer and i am going to get one soon, so i figured, instead of spending $130 - $230 on a turbo timer, why dont i just spend $300 on the page guard which has a turbo timer as well as a two way remote. I really like the idea of having a two way remote. As well as the pageguard 8000s and the 8500S (which is the model which takes pictures of  within the car) having a really nice/sifisticated looking remote.

Could you also explain, all the point of immobilisation.

I herd there is like 6 points. Can you tell me what they are from one to six.

who is the car insured with? if its like most companies requiring a 2pt (minimum) Immobilser) then they do NOT want : coloured wires, external points of immobilsation (IE external relays) that are easily found and removed, one that doesn't auto arm if you forget, doens have glass break detection or shock. ( the PG units have a horrible shock sensor its on or off - very little in between)

6 points can be anything inthe car. there is not set rule on this. if I cut the fuel pump in 6 places then thats 6 point immobilisation.

Sorry, im a little n00b to auto electronics.

I dont really understand what you mean by they are easily bypassed and what the external relay is/does.

Could you also clairfy these things for me.

easily bypassed means that I can ( and usually under a 30 sec to a minute) find the unit - unlpug it and drive off in my newly acquired skyline that I either intend to thrash and burn or strip and sell for parts.

ask DAN666 about easily bypassed on a 33. he should clear it up for you. ( the 34 he has now isn't going anywhere unless I take it.)

most of the korean/chinese alarms have the immobilsation point outside of the alarm. they use a relay ( electronic switch as a simple term) to immobilise a circuit on the car. now if you look closely at the image (PG8000) you will see a small black box - that is the immobilisation relay. find that relay and the car is GONE! ( actually find the module and unplug it and its gone anyway.)

any questions ring me ( website link in sig or contact link in sig) or send me a pm. I'm not a MSN person and not always on the PC.

Does my new alarm meet/beat all of the above criteria chris?

and i dont see the problem with greg selling the alarms if he can sell them at half the price they charge. if they cant handle the competition they should lower their price. and maybe make them aus standard if they want to sell them in aus

ive got the pg8000 its ok not too sure about the whole relay thing but the senor is pretty touchey! but you can change how touchey it is its on about medium on mine not too bad now or you can turn it off. so if they get in the car with the alarm going off and unplug the system its not guna save anything? hmmm reasonabley easy to find on mine.... hmmm ohhhno!!! i like the colour screen remote thought and pretty cheap too. but hey if they no good there no good.i might try and hide the system a bit more some how.

I've got a page 8000, I'm yet to install it , but from my understanding it has an internal relay, not external .

It looks like a very good alarm and the electronics are heavyduty , Not flimsy like other alarms .

There is no relay that comes with the kit like other alarms I've fitted .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...