Jump to content
SAU Community

Recommended Posts

i wanta know whatz the main differents with the different types of GTR r32

1989 to 1994 Non vspec i know the brakes are different then vspec

but what about nismo and Vspec 2 i'm :)

can someone detail differnts of all of them

i'm getting a GTR r32 when i get my p's back not caring on Price to much want something Mint as nice and jet silver

i don't mind paying a little more for a v spec if its worth it

i know if the v-spec and v-spec2 are fully original they come with different mags from factory. thats the only other difference i know off the top of my head but i reckon there are a few more

  • 2 years later...

the Victory spec has firmer suspensions setup, wider tyres 245/45, ATTESSA-PRO system, it monitors the rear tyres 100x per second, if they ever slip, the sys will detect it and split 50% of the torque to the front wheels. the normal GTR i think only has ABS and (i'm only guessing) the AWD drives with 80% rear and 20% front, correct me if i'm wrong.

GTR = Standard format

GTR V-Spec = To celebrate the success of the GT-R in both Group N and Group A racing. Brembo brakes and a retuned ATTESA E-TS system to the Nismo and N1 packages, as well as 17" BBS wheels with 235/45/17 tires.

GTR V-Spec II = (As of above) with the only change being wider 245/45/17 tires.

NISMO = Ducts in the front bumper to improve airflow to the intercooler, a bonnet lip spoiler to direct more air into the engine bay and an additional boot lip spoiler to provide more downforce.

REF - http://en.wikipedia.org/wiki/Skyline_gtr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
×
×
  • Create New...