Jump to content
SAU Community

Aftermarket Rb26 Plenums

wogzilla

By wogzilla,
in Engines & Forced Induction

 Share

Recommended Posts

manage13 Proficient

manage13

Posted
Posted
what if a good number high HP ones are still using the stock item?

I'm with you there!!!

Gary (Sydneykid) had a great post awhile back stating that changing to aftermarlet plenums have in most cases no gains and in some cases negative gains.

post-4055-1131577237.jpg

Mik Experienced

Mik

Posted
Posted
i see little point in changing either. there's nothing wrong with the factory one. i still wonder why nismo re-invented the wheel with their aftermarket jobbie.

d

The standard one may be okay for power, but with the standard plenum, more air is distributed to the rear cylinders which means an unbalanced engine and leaner mixtures on the rear cylinders (if you tune with one O2 sensor).

Hence why RB26's tend to always do ring lands on number 6, rather than one of the front cylinders.

Duncan Grand Master

Duncan

Posted
Posted

And the flow differences in injectors can be substantial, even after something like an hour of cleaning there was a variation of over 5% in the injector flow rates, which could result in a difference like 12:1 target but one cylinder running at 13:1

proengines Rising Star

proengines

Posted
Posted

It's not a terribly easy thing to flowbench test as it's impossible to accurately reproduce the conditions inside the plenum as they would be with the engine running. Pulsing and reversion will make a difference to the way the air is distributed.

You can test the percentage differences between the head with a bellmouth and the head with a plenum attached for each cylinder and gain some results from that.

The best way to test would be with an exhaust temp gauge on each manifold runner just out of the exhaust port. If you know that all the injectors flow the same and the rear cylinder runs hotter than the rest then you know that that cylinder is getting more air than the others.

Most decent computers let you trim each injector to compensate which can bandaid the problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Chris' Toyota Mark ii JZX110

      By PranK · Posted

      This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • soviet_merlin
      Duncan's V37.......race car?

      By soviet_merlin · Posted

      Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • Murray_Calavera
      Jacks that fit under GTR lips that can reach the subframe?

      By Murray_Calavera · Posted

      My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Duncan
      Chris' Toyota Mark ii JZX110

      By Duncan · Posted

      Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...