Jump to content
SAU Community

Recommended Posts

hey guys

after being into customs for about the last 4 years i think im going to invest in a 33 to see what all the fuss is about with turbo cars :(

just wondering when im going to buy one, what sort of things should i look out for? i have no idea about engines and turbos and stuff i have always been into chassis modifying etc...

how many kms are they good for?

whats the highest boost u can put thru them before they start to play up?

whats involved with givin a series one a series 2 nose job, just the headlights and front bar or ?

and anything i should be looking out for?

thanks in advance guys....

Sam B)

Link to comment
https://www.sau.com.au/forums/topic/94710-a-few-questions-about-33s/
Share on other sites

Hey mate,

Before someone bites your head off, ill say it to you nicely.

Most of the above items have already been discussed, try a search and you should get all your answers to the questions above.

Try the Tutorials/ DIY/ FAQ section of the forum for the things you should look out for when buying a skyline.

Good luck.

Edited by Paradizzle
God I had a nigthmare trying to get my car through customs <_< Not directed at you aired out...

Ha, I got accused of under valuing my car, even though I had proof of payment etc, I still had to do a stat dec etc, also I coped a few days storage coz of em as well.

Also not directed at the thread starter.

hey guys

after being into customs for about the last 4 years i think im going to invest in a 33 to see what all the fuss is about with turbo cars :(

just wondering when im going to buy one, what sort of things should i look out for? i have no idea about engines and turbos and stuff i have always been into chassis modifying etc...

how many kms are they good for?

whats the highest boost u can put thru them before they start to play up?

whats involved with givin a series one a series 2 nose job, just the headlights and front bar or ?

and anything i should be looking out for?

thanks in advance guys....

Sam B)

Just look for the usual stuff when buying a car. There is a guide in the HOW-TO / Tutorial section on what specific things to look for when buying a Skyline. I suggest you go over those before you start looking at them. Also take a camera with you and take plently of photos (VIN plate as well) so when you get home you can double check stuff you have missed or forgotten.

The car will run for I would say 200,000+ easily provided it is serviced and looked after. Of course if you never change the oil and abuse it, it will certainly fail (like anything).

Running "highest boost" doesn't make power per se. Making more power is a combination of various things boost is just the most commonly referred to term. No more than 10psi on the standard turbocharger is safe and wont shorten its life. You can run 12psi if you wish but you will certainly shorten its lifespan. The heat associated with running 12psi will cause the turbocharger to fail. More boost doesn't always mean more power. it certainly means more heat however.

Don't bother with a series 1 to series 2 conversion, just source a series 2 in the first place. The series 2 is a minor bug fix with updated parts and some external changes (bonnet, grill, lights etc). You should be able to source a stock R33 series 2 in good condition standard for 19k on the road.

The easier and sometimes the most helpful way when looking at a Skyline in particular is try and locate any other SAU members in your local area to come and look at the car with you, two people looking at a car is great advantage, especially if they are a current Skyline owner

As said,

1) look at all the regular things - you may want to get a mechanic to inspect it for you.

2) Easy 200,000 kms before major failures if left standard but be careful since most imports will have their odometers wound back in Japan.

3) 10psi is the maximum you would be able to run with the standard cooler. Better to run standard boost until you upgrade to a better cooler. A GTT cooler will bolt straight on and let you run 10psi safely for real cheap. A front mount would probably let you run 12psi on the stock turbo. I wouldn't push it further than that.

4) dont bother, its more trouble than its worth, just buy the car you want from the start. same goes for auto/manual and turbo/na. Dont kid yourself into thinking that itll be cheaper to "do a conversion" cuz it isnt.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...