Jump to content
SAU Community

Recommended Posts

I'm replacing the oil in a R32 Viscus LSD diff, since it wasn't delivered to australia they don't seem to list the type of oil required in the books in the auto parts stores. Can someone recommend a Castrol oil that would be suitable? I say Castrol because all the other fluids are castrol and I like to keep it in the family :P

Cheers

Link to comment
https://www.sau.com.au/forums/topic/94868-r32-diff-oil/
Share on other sites

If the oil isnt black and its still gold, dont worry about it, the oil that the japanese use in diffs as such is much thicker and better........but if its black yeh change it with what u think is necessary, aussie oil isnt as good.......but its easier to find then HKS diff oil or something like that

Link to comment
https://www.sau.com.au/forums/topic/94868-r32-diff-oil/#findComment-1713579
Share on other sites

Well the oil wont go black in a diff, cos theres nothing to contamniate it with, but it still might be 'worn out'.

You can safely use any GL5 oil that is rated for a differential. It does NOT have to specifically be for an LSD type diff, because the viscous unit is not affected by the oil. Cos you like castrol you can use;

Castrol EPX 80W90

Castrol Multitrax

Castrol SAF-XA (Synthetic)

Castrol Syntrax (Synthetic) <--- Recommend this one.

Cheers.

Edited by Busky2k
Link to comment
https://www.sau.com.au/forums/topic/94868-r32-diff-oil/#findComment-1713956
Share on other sites

If the oil isnt black and its still gold, dont worry about it, the oil that the japanese use in diffs as such is much thicker and better........but if its black yeh change it with what u think is necessary, aussie oil isnt as good.......but its easier to find then HKS diff oil or something like that

Where did you get the idea that Japanese oil is better than Australian. That is not true.

Link to comment
https://www.sau.com.au/forums/topic/94868-r32-diff-oil/#findComment-1713983
Share on other sites

Well the oil wont go black in a diff, cos theres nothing to contamniate it with, but it still might be 'worn out'.

You can safely use any GL5 oil that is rated for a differential. It does NOT have to specifically be for an LSD type diff, because the viscous unit is not affected by the oil. Cos you like castrol you can use;

Castrol EPX 80W90

Castrol Multitrax

Castrol SAF-XA (Synthetic)

Castrol Syntrax (Synthetic)  <--- Recommend this one.

Cheers.

The oil in a diff CAN go black. If it has been punished it will become burnt, the more burnt it becomes, the more black it becomes.

As for Castrol oil - I would not touch the crap. I put Castrol oil in three seperate Skyline Diffs and all three developed a whining noise. One of those was my car and the whine got worse and worse until I changed it - for the third time. Castrol don't want to know anything about it because it is an Import.

I only ever recommend REDLINE Diff Oil. You should use a 90 or 140 grade. Places like Autobarn can get it for you or if you are in Brisbane, Thompson Spare Parts stock it on the shelf.

If you have to use Castrol, ONLY USE THE SYNTRAX AS SUGGESTED ABOVE. The top two listed will wreck your diff.

Link to comment
https://www.sau.com.au/forums/topic/94868-r32-diff-oil/#findComment-1714014
Share on other sites

Well not everyone wants to buy synthetic so yes, I suggested the mineral oils, although I would not use them myself.

If the diff oil is going black, it is most likely to be poor quality (ie lots of oxidising), poor sealing issues, or there is lots of wear happening!

Link to comment
https://www.sau.com.au/forums/topic/94868-r32-diff-oil/#findComment-1719511
Share on other sites

The oil in a diff CAN go black. If it has been punished it will become burnt, the more burnt it becomes, the more black it becomes.

3lit3 if the oil is gone/punished,will you start hearing a clunk when engaging first or reverse?or does that just mean the diff is probably worn?

cheers

Link to comment
https://www.sau.com.au/forums/topic/94868-r32-diff-oil/#findComment-1723603
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...