Jump to content
SAU Community

Recommended Posts

QLD UNOFFICIAL CALENDARS.

They are a professionally printed A3 calendar featuring a 250GSM Gloss Cover and 175GSM Gloss Pages.

Final ARTWORK (apart from the collage/rear cover) should be competed this arvo, so I'll post it up over the weekend.

Keep an eye out for it.

FINAL ORDERS WILL NEED TO BE PAID FOR BY THE 6th AT THE ABSOLUTE LATEST> i'll order on the 7th.

Hopefully a 10 day turn around.

So get you $$$ to me.

They will be $25 each.

MRR34 x4 PAID

AzzurA x1 PAID

Gts25t4door x1 PAID

JLnewton x1 PAID

R33Skyliner x1 PAID

Genesis x1 PAID

Jaqule x1 PAID

Chaos x1 PAID

SKA x1 PAID

Wrxkilla x2 PAID

Liam x 1 PAID

Col-GTSX x1 PAID

twoquick x1 PAID

95SKY x1 PAID

n15m0 x2 PAID

Rhinorbel x1 PAID

Slamm x2 PAID

Silver_R34_GT-T x1 PAID

SMR33 x1 PAID

3lit3 32 x2 PAID

Willo x3 PAID

impact_blue x3 PAID

Revhead x1 PAID

shaneo81 x1 PAID

Alfadog x1 PAID

Dangerous_daveo x2 PAID

Squizz x2 PAID

Penfold x1 PAID

BelGarion X1 AWAITING CONFIRMATION

Link to comment
https://www.sau.com.au/forums/topic/95287-sau-qld-calendar-orders/
Share on other sites

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...