Jump to content
SAU Community

Gb: R33 Gts-t And Gtr And R34 Gtt Radiator Guides


Recommended Posts

  • Replies 520
  • Created
  • Last Reply

Top Posters In This Topic

where can i get one of the series 2's that was "wrong" ? im wanting to bodgy it up for something else on my series one 33.

I will second that, is there any way of doing a "bodgy" to get these to fit ? if we do the stuffing around ourselves?

What is actually wrong with them? Instead of chucking them can we talk about a reduced price? or is it not worth doing?

I have a series 1 one that was sold to me by Maxx saying it was a series 2. You can bodgy it to make it fit, but its still f**ked and not worth it. Im hanging for a proper series 2 one here then ill piss this other piece of shit off.

Edited by Xizor
I have a series 1 one that was sold to me by Maxx saying it was a series 2. You can bodgy it to make it fit, but its still f**ked and not worth it. Im hanging for a proper series 2 one here then ill piss this other piece of shit off.

What is required to make it fit? is it just the around the bonnet catch?

UAS i think it was told me i could buy one of their series 1 ones and just cut out a piece to make it fit. Is this the only difference?

What is required to make it fit? is it just the around the bonnet catch?

UAS i think it was told me i could buy one of their series 1 ones and just cut out a piece to make it fit. Is this the only difference?

I cant really comment on the UAS one as i dont think its exactly the same as the one i bought off Maxx. But we had to cut out the bonnet latch bit AND bend the bonnet latch lever, and its still not right. And the airguide bit at the bottom doesnt cover down how it should. And not all the holes matched up, had to drill an extra 1 or 2. Essentially mate, i would wait a few weeks or whatever and get one that you know will fit. I very much regret buying and forcing this piece of shit on and cant wait to replace it with something proper.

The Series II guide is totally different to the Series I.

Different bends and everything. Different cutting profile as well.

My ones are on order now, I'll post pics when they are done...

In fact, there are some pics in this thread somewhere....

I cant really comment on the UAS one as i dont think its exactly the same as the one i bought off Maxx. But we had to cut out the bonnet latch bit AND bend the bonnet latch lever, and its still not right. And the airguide bit at the bottom doesnt cover down how it should. And not all the holes matched up, had to drill an extra 1 or 2. Essentially mate, i would wait a few weeks or whatever and get one that you know will fit. I very much regret buying and forcing this piece of shit on and cant wait to replace it with something proper.

Thanks for the info.

I will just have to be patient.

Cheers

  • 2 weeks later...
The Series II GTS-T and the Series II Stag guides and scoops are on order at the new place and will be ready in a couple of weeks.

Whats the sitch...its been 2 weeks now since your above post back on the 8th so have you any news for us>>>?

Hey guys.

Series I and R33 Series I guys...

The powdercoating should be ready this arvo or Monday morning.

I'm waiting for the call.

Hey guys.

Series I and R33 Series I guys...

The powdercoating should be ready this arvo or Monday morning.

I'm waiting for the call.

No offence but.. are you being ignorant or did you just skip past my post on purpose? I can't speak for the rest of the R33 Series II guys here but my patience is thinner than john howards hair!!

No offence but.. are you being ignorant or did you just skip past my post on purpose? I can't speak for the rest of the R33 Series II guys here but my patience is thinner than john howards hair!!

What about his eyebrows?

Darkboy.

Sorry mate, I must have missed your post.

The Stag Series II and R3 Series II guides are being cut, bent and oated by one company to try to eliminate delays between processes.

This is costing me more money than I allowed in the beginning, but that's my problem not yours.

I expect them to be ready in a week or so depending on the company that is doing them.

The Series I Stags and GTS-Ts powdercoating should be ready today, I'll swing by the place tomorrow morning and pick them up.

Should be able to starting sending towards the end of this week.

BASS OUT

Stagea Series II and R33 GTS-T Series II and any others.

I spoke with the company doing the cutting and bending of your bits today.

They are cutting them today and bending early next week.

Looking good!

BASS OUT

Hey ppls.

Okay, here's the state of play.

I'm currently in the middle of boxing up all the Series I R33 and Stags and R34s.

Bubble wrapping and boxing up.

I inspected the Series II R33 and Stags this morning and they are now off getting powdercoated. I expect to pick them up early next week, maybe Monday or Tuesday. Then I'll be boxing them up also.

Almost there ppls.

I'll post up some pics when I get the second batch of guides.

:P;)

BASS OUT

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...