Jump to content
SAU Community

Recommended Posts

There is two plugs down the side of the boot when opened they revial a 10mm nut, i unscred them and wiggled the wing and barly moved let along came off...

Any ideas... Seen heeps of people with it off...

All info appricated.

-SiNDOWS

Link to comment
https://www.sau.com.au/forums/topic/95297-r33-standard-wing-removal/
Share on other sites

Is that like the boot lining on the boot lid or do you mean like a double sided tape stuff holding the wing to the car?

Cause i think i know what you mean, as when i took those two bolts off, i was trying to lift the wing off and i could see some (double sided tape looking stuff which is black between the wing and the boot lid.)

please clarify...

make sure you have removed the bolt which is under the felt stuff on the inside of the boot should be 1 on each side these also hold down the wing after that its just a mateer of lifting it up hard enought just free the clips

make sure you have removed the bolt which is under the felt stuff on the inside of the boot should be 1 on each side these also hold down the wing after that its just a mateer of lifting it up hard enought just free the clips

yeah found them today... ended up getting them off... pulling the wing hard and snapping the two plastic clip things. Which now i know if i just pulled the wing foward when was behind the car it would have come off easy as f#ck...

Also, there is heeps of marks and shit on the boot from it... Any good methods for getting it all off?

Cheers,

SiNDOWS

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...