Jump to content
SAU Community

Engine Stalling After Installing Bov Need Help Pls

Nismo Racer

By Nismo Racer,
in Engines & Forced Induction

 Share

Recommended Posts

Nismo Racer Mentor

Nismo Racer

Posted
Posted

Hi, my car is a S1 R33 GTS25t and the BOV in question is a Blizt DD. After intalling the BOV when breaking into a shape corners the engine will stave of air and stall on me. I have try this a number of times and it still stall on me BTW the car is AUTO. I think it's the hose overheating or the ECU is not use to the BOV yet. I have reset the ecu and will test some more on the weekend. did anyone have any problem like this before? maybe because i'm not running a pod.

Also can anyone please attach a pic of the engine bay with apexi pod installed with stock AFM.

Thanks in advance.

paulr33 Grand Master

paulr33

Posted
Posted

atmo bov you have. atmo bov no worky. it vents air, the engine expects that air is still be there so it adds fuel / timing to suit however the air is not present so it runs too rich and stalls. fix use stock bov

The Mafia Grand Master

The Mafia

Posted
Posted (edited)

dude, you can't fix it.

Well, actually you can. Either plumb back your BOV or put the stock one on.

Why would you bother putting a loud fully sik OMG!!!!111oneoneone!!!11 BOV on a auto anyway.

Do you drive around, foot flat, and taking it off the throttle quickly to make your BOV vent on purpose when there are some fully sic chiks around?

Let me guess, you're a poser?

hhmmm

atmo bov you have. atmo bov no worky. it vents air, the engine expects that air is still be there so it adds fuel / timing to suit however the air is not present so it runs too rich and stalls. fix use stock bov

This is why your Fully sic BOV is making your car stall. You run an AFM before the BOV, it measures air that is gonig into the motor and the ECU puts fuel and timing in to suit.. Use a Vent to ATMO BOV and it takes away this air and leaves the fuel behind..

And what do you know.. that fuel doesn't have that air anymore to burn, so it stalls, pops, farts, and carries on.

If you want to run a fully sic ATMO bov, get a powerfc d-jetro and run a MAF at the throttle body.

That'll make the chicks look....

oh and if your wondering why your getting a lot of smart assed answers...Next time, try using the SEARCH function, this topic has been covered about 34568938930295345 times, by people that have no idea about the car they drive. They think you just turn the key and the wheels go magically. And they also seem to think that if you install a Vent to atmo BOV all the chicks will line up and want to ride with you.

lol can't believe I typed all of that.

Edited by The Mafia
lordsnipe Community Regular

lordsnipe

Posted
Posted

why does everyone say use the stock? If he wants the sound, he is entitled to it.

It's all about the setting of the BOV. I got a Greddy Type-S and my car doesn't stall at all! It's all about adjustment, tighten the spring and it should stop stalling, but don't tighten too tight otherwise it'll flutter and the BOV isn't actually doing its job.

The only side effect of an atmo BOV is that it'll be rich when the BOV vents, and you may get a bit of backfire, especially after letting off on hard throttle.. but being an auto, you won't get rich conditions on gear changes.

having said that, yeah, he should get flamed for not searching.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
Any Tech feed back? thx

you got it within the first 8 words of the first reply

atmo bov you have. atmo bov no worky.

simply put, you wanna use an ATMO BOV... you'll need to purchase a SAF-c/PowerFC and have the thing tuned so that it wont spit the dummy

This can be found by searching and reading, trust me :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Blue slip

      By MBS206 · Posted

      Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • GTSBoy
      Blue slip

      By GTSBoy · Posted

      The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • soviet_merlin
      Ethanol Content Sensor - Always at 11%?

      By soviet_merlin · Posted

      Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
    • PranK
      Blue slip

      By PranK · Posted

×
×
  • Create New...