Jump to content
SAU Community

Recommended Posts

Hey all,

Just wondering if anyone else has the factory remote central locking in there skyline? (I've got a Series II) I'm having some issues with it, when I originally bought the car it only seemed to work when sitting in the car. I thought "No problem" just get a new battery for the remote. Prior to purchasing a new battery it stopped working all together and a new battery has not solved the issue. Thoughts would be appreciated, especially from anyone who has dealt with this before. For starters, where's the control unit and RF receiver?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/95455-factory-remote-central-locking/
Share on other sites

96+s2 has the control unit on hte passenger side beside the glovebox on the outside. glove box and panel have ro be removed to get at it. yours *MAY* be a dealer fit item ( I see a lot of these) and if you are lucky nissan *MAY* be able to rekey it. failing that - aftermarket is $100 for the whole unit with a boot release option.

I had this problem as well; it was my remote that was stuffed for my s1 R33. Got it fixed for 25 simoleans by an alarm install place, the guy was really good. According to him once you lose the factory remote or if it gets smashed then that's it as it's nearly impossible to re-code the factory remote.

"There's very little meat in these gym mats!"

Hey the guy who fixed it for me is acually a member of these forums, goes by the name of MaxAction. His contact number for his business is (08) 9242 4000 in Perth. Hope this helps!

"There's very little meat in these gym mats!"

Mine was in the driver door, under the trim. Stamped as Nissan all over it, with a little arial on it. I never got the key, so I dunno if it works. I disconnected the unit from the harness, and my car security installer was able to tap off it to install the remote central locking in my alarm system. =-D

I have a piccy if anyone's interested?

looks like the one I pull from 32,33 GTR's . thats a dealer fit item. the FACTORY fit one is the one I described. I like the dealer one as it gives me an actuator to work with when I do alarms in those cars. I keep the siren as it makes a good lights on reminder.

Ok,

pulled off both door trims and did not find the above module. I did however find this module above the pedals in the foot well

module.jpg

I imagine that is the control unit, was connected to a green plug. Wonder if I can take this in to a place and have it tested with my remote, or better yet talk to Nissan.

Thoughts?

Also..

Found this plug spare, no idea what it's for, anyone know? Diagnostic connector or something?

plug.jpg

IF you can find one the toyota dealers used that module in the celica and a few other cars from 96-99. may be worth a shot. as for programming it- any alpine dealer may still have te manuals for a 8040 or 8041 and they will be able to program it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...