Jump to content
SAU Community

Recommended Posts

ok in the last two weeks my car has started doing this. when i'm driving the car to work in the morning, probably every second day the car completely shuts itself down.

it usually happens when the oil is at 10 degrees below normal temperature.And everytime, the hicas light comes on and then the 4wd light follows. then the engine loses power and stops.

then after this happens it takes almost an hour for the car to start again.Also when i try to start the car the fuel pump doesn't make the buzzing sound like normal.

the car is stock except for a cat-back exhaust, oh and it is an r32 gtr

any help is really appreciated

Link to comment
https://www.sau.com.au/forums/topic/95739-engine-shuts-down/
Share on other sites

I had this problem 2 weeks ago, and it is already fixed, it cost me $470. Mechanican changed 4 sparkplugs and replace some thing to control the fuel go into the engine because the fuel wasn't burning completely. So first, u can try to change sparkplugs and see how it goes. That may save u some money.

How old is your battery? Skylines are notorious for their susceptibility to voltages and charge rates.

The other possibility is the ignitor module for the coils - they tend to be susceptible to excessive heat and will often stop until given the chance to cool off a bit.

yeh that sounds like it could be it, it happens intermittently just before the oil gets to working temp, but it doesn't happen all the time, 70% of the time it drives fine

although usually before it happens the car has a slight miss, sorry to hear about you're car what replaced it?

My car is doing this also. It was fine before I took it to the mechanic, he replaced the AFM cause they said the car was running lean. Now it drops out on me and has flat spots. I usually just wait a minute before starting it again and then it seems to be ok. It happended for a couple days. Then i fiddled around with the AFM it didn't do it for 2 days.. now its doing it again. So i'm guessing the mechanic put in a dodgy AFM. Or maybe its the fuel pump. I have to take it back and get them to look at it. I just hope this doesn't cause any damage to any other parts of the engine, the turbo especially. All of the misfiring and stopping and starting.

I had this problem 2 weeks ago, and it is already fixed, it cost me $470. Mechanican changed 4 sparkplugs and replace some thing to control the fuel go into the engine because the fuel wasn't burning completely. So first, u can try to change sparkplugs and see how it goes. That may save u some money.

do you know what the part was that the mech changed?

So have you fixed ur car?? because my car just happen exactly the same problem again. And i don't want to spen any more money on this, what did you do for ur car. and do you know where are the spark plugs, i can't find where it is.

Well thats a good one. Spark plugs are under your coil pack cover. The aluminium bit that goes over your engine head (In the middle). Under that you have your coil pack, then under that are your spark plugs. =)

Do you have an Rb20,25 or 26? The Rb20, you might need to take off the oil hose on the top first.

Well done, I hope your C.A.S. was the problem... how much did you spend all up to fix your problem?

Thanks. B)

Well thats a good one.  Spark plugs are under your coil pack cover.  The aluminium bit that goes over your engine head (In the middle).  Under that you have your coil pack, then under that are your spark plugs. =)

Do you have an Rb20,25 or 26? The Rb20, you might need to take off the oil hose on the top first.

Well done, I hope your C.A.S. was the problem... how much did you spend all up to fix your problem?

Thanks.  B)

First, I spent 470, then 3 weeks later it seem like happen again, machanican recomenced me to change bigger muffler becaue it can burn more fuel. I bourgh a full Apexi muffler system, it cost me only 520, now car works perfectly.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • oh they were with that motor, you need to remove the engine to change the spark plugs (don't have to, but it does make it easier)
    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
×
×
  • Create New...